Removing Memory And Option Cards; Accessing The Printer System Board - IBM infoprint 1764 User Manual

Removing memory and option cards

To remove memory or option cards, use the following illustration to locate the connector for the card you want to remove.
Option card connector
Firmware and flash
memory card connectors
Hard disk connector

Accessing the printer system board

1
Turn the printer off.
2
Unplug the printer power cord.
3
Disconnect all cables from the back of the printer.
4
Locate the access cover on the back of the printer.
5
Remove the four access cover screws as shown.
6
Remove the access cover.
Installing and removing options
Removing memory and option cards
18
Memory card connector