Table of Contents
Advertisement
3
Pull down the latches. They slide toward the center to release the fuser.
4
Pull the fuser out, and set it on a clean, flat surface.
5
Unsnap the housing and set it aside.
6
Lift up the fuser roller cover and remove the jam.
7
Close the fuser roller cover.
8
Snap the housing back onto the fuser.
9
Insert the fuser back into the printer.
10
Slide the latches out, and then pull up to refasten them.
11
Close the doors.
Clearing paper jams
Clearing fuser jams
69
Advertisement
Table of Contents
