Resetting The Lamp - Lenovo C500 User Manual

3. Remove the two screws from the lamp module A .
4. Lift the module handle up B .
A
A
B
5. Pull firmly on the module handle to remove the lamp module, as shown.
6. Reverse steps 1 through 5 to install the new lamp module.

Resetting the lamp

After replacing the lamp, you should reset the lamp hour counter to zero. Please follow the steps below.
1. Press the Menu button to open the OSD.
2. Press the left or right cursor button to move to the Information menu.
3. Press the up or down cursor to move down to Lamp Hour Reset.
4. Press the Enter button. A message displays.
A-2
Lenovo C500 Projector User's Guide
Downloaded From projector-manual.com Lenovo Manuals