Table of Contents
Advertisement
The following table shows the options that you will see in the Setup menu and the default.
Item
Video Type
Video AGC
Projection
Frequency
Tracking
Digital Zoom
Control
Network Setting
Downloaded From projector-manual.com Lenovo Manuals
Description
Press the left or right cursor button to select a
video type. Range: Auto - NTSC - PAL - SECAM
Press the left or right cursor button to enable or
disable the automatic gain control for the video
source. Range: On - Off
Press the left or right cursor button to select a
different projection type. Range: Desktop
mount-front of screen, desktop mount-rear of
screen, ceiling mount-front of screen, ceiling
mount-rear of screen
Press the left or right cursor button to adjust the
A/D sampling clock. Range: 0 - 180 degrees
Press left or right cursor button to adjust the
sampling number. Range: 0 - 100
Digital operation for zoom and pan adjustment.
Press Enter. The Zoom menu appears.
Press the up cursor button to zoom in. Press the
down cursor button to zoom out. Press Enter to
open the Pan menu. (You must zoom in before
you can enter the Pan menu.)
Use the cursor buttons to pan to the zoomed
image. Press the Menu button to exit.
Press the left or right cursor button to select
remote control method. Range: RS-232C - RJ-45
Press the Enter button to adjust network settings
for the projector.
Default
Auto
On
Desktop Front
Auto-detected
Auto-detected
n/a
RS-232C
n/a
Chapter 5. On-Screen Display menu controls
5-9
Advertisement
Table of Contents
