Table of Contents
Advertisement
Resetting the lamp timer
After replacing the lamp, you should reset the lamp timer to zero. Please follow
these steps:
1. Press the Menu button to open the main menu.
2. Press the left/right cursor button to move to the Information menu.
3. Press the up/down cursor button to move down to Lamp Hour Reset.
4. Press the Enter button. A message screen appears.
5. Press the cursor buttons in this order: down, up, left, right. The Information
Using the security slot
The projector has a security slot, (see Figure 1-4 on page 1-3). Refer to the
information that comes with the lock for instructions on how to use it.
Attention
This product contains a Metal Arc Lamp, which contains Mercury. Dispose of
it as required by local ordinances and regulations.
The USA restricts or prohibits the disposal of some or all lamps containing
mercury in the municipal waste stream. Please visit www.lamprecycle.org for
more information on specific state disposal requirements and recycling
facilities.
For users in Connecticut, please call Northeast Lamp Recycling toll-free at
1-888-657-5267 to place an order for the delivery of a kit that includes a box
for the lamp, tape, and a return shipping label.
menu appears again showing the Lamp Hours reset to zero.
Attention
Lamp life is a measure of brightness degradation only, and is not a
specification for the time it takes a lamp to fail and cease light output. Lamp
life is defined as the time it takes for 50% of a lamp sample population to
decrease in brightness by 50% of the rated lumens for the specified lamp. For
example, if a sample of lamps are rated as 1500 lumens and 2000 hours of
Lamp life, then after 2000 hours, 50% of the sample will experience a
brightness decrease of 50% to 750 lumens.
Appendix A. Maintenance
A-3
Advertisement
Table of Contents
