Table of Contents
Advertisement
The following table shows the options that you will see in the Options Menu and the default.
Item
Blank Screen
Auto Source
Auto Power Off
Volume
Menu Position
Menu Display
Translucent Menu
Cancel
Setup menu
To access the Setup menu,
1. Press the Menu button to open the OSD.
2. Press the left or right cursor button to move to the Setup menu.
3. Press the up or down cursor button to move up and down in the Setup menu.
4. Press the left or right cursor button to change values for settings.
5. Press the up or down cursor buttons to select a different Setup menu item for change.
6. If you wish to cancel all changes made within the Setup menu, select Cancel and press the Enter
button.
7. Press Menu to confirm the new settings and leave the Setup menu.
5-8
Lenovo C500 Projector User's Guide
Downloaded From projector-manual.com Lenovo Manuals
Description
Press the left or right cursor button to select color at blank screen.
Range: Black - Red - Green - Blue - White
Press the left or right cursor button to enable or disable automatic
input port searching. Range: Off - On
Press the left or right cursor button to enable or disable the automatic
shutdown of the lamp after 10 minutes of inactivity. Range: Off - On
Press the left or right cursor button to adjust volume. Range: 0 - 10
Press the left or right cursor button to select OSD location. Range: Left
- Right - Center - Down - Up
Press the left or right cursor button to select the OSD timeout delay.
Range: 10 - 20 seconds
Press the left or right cursor button to select the OSD background
translucency level. Range: 0% - 100%
Cancels changes made in the OSD screen and returns all parameters to
their previous settings.
Default
Blue
On
Off
5
Center
15 seconds
0%
n/a
Advertisement
Table of Contents
