Table of Contents
Advertisement
Item
User Color
White Peaking
Logo Display
Auto Keystone
Auto Keystone
Calibrate
Cancel
User color
To access the User color menu,
1. Press the Menu button to open the OSD.
2. Press the left or right cursor button to move to the Properties menu.
3. Press the up or down cursor button to move to the Advance Feature menu and then press Enter
button.
4. Press the up or down cursor button to move to the User Color menu and then press the Enter button.
5-6
Lenovo C500 Projector User's Guide
Downloaded From projector-manual.com Lenovo Manuals
Description
This feature adjusts the color balance in each color of RGB (red, green,
blue) and their neutral colors (cyan, magenta, yellow, white) by using color
correction adjustment. Increasing a color's setting heightens the intensity of
that color on the screen, while a lower setting makes a color less intense.
Press the up or down cursor button to select a color. Press the left or right
cursor button to adjust the selected color. Range: 0 - 100
White Peaking increases the output in the brightest whites without
changing blacks and grays. It does not seriously obscure white detail. For a
stronger image, adjust toward a stronger setting. Press the left or right
cursor button to adjust the white peaking value. Range: 0 - 10
Press the right or left cursor button to enable or disable if the logo displays
when the projector starts, and when no source is detected. range: On - Off
When enabled, the projector automatically corrects any keystone distortion
in the image when you press the Auto button(from the remote control or
the keypad). Press the left or right cursor button to enable or disable Auto
Keystone.
Press Enter to re-calibrate keystone correction function.
Cancels changes made in the OSD screen and returns all parameters to
their previous settings.
Default
n/a
Data source: 10;
Video source 2
On
Off
n/a
n/a
Advertisement
Table of Contents
