Elation platinum beam 5R extreme User Manual page 31

CLEARING EWDMX TRANSMITTER LINK
Wireless DMX" sub menu from the "PERSONALITY" menu, and then
select "Clear WDMX Memo" to clear any existing link between the fixture and a
EWDMX Transmitter. The Wireless indictor on the fixture will turn solid
link is severed.
You may also clear the link directly from the EWDMX Transmitter. First, be sure the
fixture(s) is powered ON, and then hold down the configuration button on the
EWDMX Transmitter for as least 5 seconds. This will automatically clear the link
between the EWDMX Transmitter and any fixture that is powered ON. All EWDMX
indictors will glow solid
FIXTURE WIRELESS INDICATOR
(Rapid Flashing) = Syncing to an EWDMX Transmitter.
RED/GREEN
RED/GREEN (Slow Flashing) = Paired with an EWDMX Transmitter but
not receiving a DMX signal from a controller.
GREEN (Solid) = Paired with an EWDMX Transmitter and receiving
DMX data.
RED (Solid) = Not paired with an EWDMX Transmitter (FREE).
if the procedure was successful.
RED
31
w w w . e l a t i o n l i g h t i n g . c o m
PLATINUM BEAM 5R EXTREME™ User Manual Ver. 1
RED when the