Elation platinum beam 5R extreme User Manual page 12

LAMP SAFETY INSTRUCTIONS
ALWAYS replace lamp every 2,000 Hours.
Use only Genuine Original Philips™ Platinum 5R lamps. Other brand lamps may
cause damage and void the warranty!
NEVER touch the lamp with your bare hands, as the oil from your hands will
shorten the life of the lamp.
Always disconnect the fixture's main power supply before replacing lamp.
Allow fixture to cool for at least 15 minutes before attempting any type of service.
Make sure ALL covers/panels are replaced/secured before operating the fixture
to prevent any risk and/or damage to eye retina from UV Radiation exposure!
LAMP INSTALLATION PROCEDURE
1. Place fixture on a flat surface and remove (4) screws marked "A", "B", "C", and
"D" and then remove rear cover plate (see image below) to access the lamp.
LAMP COVER PLATE
w w w . e l a t i o n l i g h t i n g . c o m
12
PLATINUM BEAM 5R EXTREME™ User Manual Ver. 1