Dual Access (Monochrome Only); Broadcasting (Monochrome Only) - Brother MFC-J5910DW Advanced User's Manual

Dual Access
(Monochrome only)
You can dial a number and start scanning the
fax into memory—even when the machine is
sending from memory, receiving faxes or
printing PC data. The LCD shows the new job
number.
The number of pages you can scan into the
memory will vary depending on the data that
is printed on them.
Note
If the Out of Memory message
appears, press Stop/Exit to cancel or
Mono Start to send the pages scanned so
far.
Broadcasting
(Monochrome only)
Broadcasting is when the same fax message
is automatically sent to more than one fax
number. You can include Groups and
Speed Dial numbers in the same broadcast.
After the broadcast is finished, a Broadcast
Report will be printed.
Before you begin the broadcast
Speed Dial numbers must be stored in the
machine's memory before they can be used
in a broadcast. (uuBasic User's Guide:
Storing Speed Dial numbers)
Group numbers must also be stored in the
machine's memory before they can be used
in a broadcast. Group numbers include many
stored Speed Dial numbers for easier dialling.
(Setting up Groups for Broadcasting
uu page 29)
How to broadcast a fax
3 a
Press
b
Load your document.
c
Press Options.
d
Press s or t to display
Broadcasting.
e
Press Broadcasting.
f
Press
Add number from SpeedDial.
Press
Alphabetical Order or Numerical Order.
Press the check boxes of the numbers
you want to add to the broadcast.
After you have checked all the numbers
you want to add, press OK.
3
Note
If you have downloaded Internet Fax:
You can broadcast to an E-mail address if
you stored it as a Speed Dial number.
(uuBasic User's Guide: Storing Speed
Dial numbers)
g
Press OK.
3
Sending a fax
(FAX).
to search by
3
3
11