More Functions - Daewoo SH-3510P Instruction Manual

More Functions

The counter counts in real time from the point you load the cassette. This does not have to be its
beginning! The counter does not count unrecorded parts of the tape.
If you rewind beyond the zero position, the counter counts in negative values (e.g. – 0:01:15).
Clock / counter display
Each time you press [DISPLAY] button,
1x: Time and date+current status
2x: Counter+current status
3x: disappear.
• If the tape is not wound (PLAY, FF, REW,...), the tape remaining time does not appear.
• If the timer recording information is contained within the received broadcast signal , press the button to
display the VPS/PDC icon within the received broadcast signal.
Remaining time and cassette length
PR+/-:SELECT
OK:CONFIRM
When you want the player to show the time remaining from the current player tape position (to find out if
there is sufficient space for a recording, for example).
To ensure the remaining time shown is accurate, select from the list given in the menu the cassette tape
length currently being used.
Searching a recorded programme with index
When you record a programme, the VCR places an index mark at the start
of the recording.
To search fo an index mark
1. Call up the player's "SETUP" menu, choose "TAPE CONTROL"
2. Choose index + to search forward or index - to search backward.
The VCR will locate your index mark and begin playback.
Downloaded From Disc-Player.com Daewoo Manuals
Time and date
counter
TAPE CONTROL
TAPE REMAIN
TAPE REMAIN
E-180
GO TO ZERO
E-240
COUNTER RESET
E-300
INDEX+
INDEX-
PR+/-:SELECT
OK:CONFIRM SETUP:END
SETUP:END
STOP SP PR01
STEREO ON
14:00 08/08 V E180 00:48
Call up the player's "SETUP"
menu,choose "TAPE CONTROL".
• Remaining time display is only
possible when the cassette is
E-240 01:27
loaded.
TAPE CONTROL
TAPE REMAIN
GO TO ZERO
COUNTER RESET
INDEX+
INDEX-
PR+/- :SELECT
OK:CONFIRM SETUP:END
BBC1
29