More Functions - Daewoo SD-8100 Owner's Manual

DVD-Video(PAL) 02.3.15 5:44 PM ˘ ` 39

More Functions

The counter counts in real time from the point you load the cassette. This does not have to be its beginning! The
counter does not count unrecorded parts of the tape.
If you rewind beyond the zero position, the counter counts in negative values (e.g. – 0:01:15).
Clock / counter display
Remaining time and cassette length
Accessing counter zero position
1x: Time and date+current status
2x: Counter+current status
3x: disappear
C H E C K
• If didn't wind tape (PLAY, FF, REW,...), it doesn't appear the tape remain time.
• In case that the timer recording information is inputted in the received broadcasting signal , press
the button to display the VPS/PDC icon.
Call the player's "MAIN SETUP", choose "TAPE CONTROL".
TAPE CONTROL
TAPE REMAIN
GO TO ZERO
COUNTER RESET
INDEX+
INDEX-
PR+/-:SELECT
OK:CONFIRM SETUP:END
When you want the player to show the time remaining from the current player tape position (to
find out if there is sufficient space for a recording, for example).
To ensure the remaining time shown is accurate, select the length of cassette currently loaded
by selecting this function until you reach the correct length.
C H E C K
• Remaining time display is only possible when the cassette is loaded.
The player will wind to the position 0:00:00 and stop.
Time and date
counter
U P !
TAPE REMAIN
E-180
E-240
E-300
PR+/-:SELECT
OK:CONFIRM SETUP:END
U P !
STOP SP PR01 ARD
STEREO ON
14:00 14/10 V E180 00:48
E-240 01:27
REW SP
GO TO ZERO
0:02:13
39