More Functions - Daewoo SD-8100P Owner's Manual

DV6T711P-AP(DESUK)1 02.7.24 11:17 AM

More Functions

I The counter counts in real time from the point you load the cassette. This does not have to be its beginning! The
counter does not count unrecorded parts of the tape.
I If you rewind beyond the zero position, the counter counts in negative values (e.g. – 0:01:15).
Clock / counter display
Remaining time and cassette length
Accessing counter zero position
Downloaded From Disc-Player.com Daewoo Manuals
˘ ` 39 mac001 300DPI 120LPI
Each time you press [DISPLAY] button,
1x: Time and date+current status Time and date
2x: Counter+current status counter
3x: disappear.
But if you press [CLK/CNT] button, clock and counter on
display window will change each other.
CHECK UP!
• If didn't wind tape (PLAY, FF, REW,...), it doesn't appear the tape remain time.
• In case that the timer recording information is inputted in the received broadcasting signal ,
press the button to display the PDC icon.
Call the player's "MAIN SETUP", choose "TAPE CONTROL".
TAPE CONTROL
TAPE REMAIN
GO TO ZERO
COUNTER RESET
INDEX+
INDEX-
PR+/-:SELECT
PR+/-:SELECT
OK:CONFIRM SETUP:END
OK:CONFIRM SETUP:END
When you want the player to show the time remaining from the current player tape
position (to find out if there is sufficient space for a recording, for example).
To ensure the remaining time shown is accurate, select the length of cassette currently
loaded by selecting this function until you reach the correct length.
CHECK UP!
• Remaining time display is only possible when the cassette is loaded.
The player will wind to the position 0:00:00 and stop.
STOP SP PR01
STEREO ON
14:00 14/10 V E180 00:48
TAPE REMAIN
E-180
E-240
E-300
E-240 01:27
REW SP
GO TO ZERO
0:02:13
ARD
39