More Functions - Daewoo SD-9100 Owner's Manual

DV6T712D-AQ/I(GB) 02.11.12 5:39 PM

More Functions

I The counter counts in real time from the point you load the cassette. This does not have to be its
beginning! The counter does not count unrecorded parts of the tape.
I If you rewind beyond the zero position, the counter counts in negative values (e.g. – 0:01:15).
Clock / counter display
Each time you press [DISPLAY] button,
1x: Time and date+current status
2x: Counter+current status
3x: disappear.
But if you press [CLK/CNT] button, clock and counter on display window
will change each other.
• If didn't wind tape (PLAY, FF, REW,...), it doesn't appear the tape remain time.
• In case that the timer recording information is inputted in the received broadcasting signal , press the button
to display the VPS/PDC icon.
Remaining time and cassette length
TAPE CONTROL
TAPE REMAIN
GO TO ZERO
COUNTER RESET
INDEX+
INDEX-
PR+/-:SELECT
OK:CONFIRM SETUP:END
When you want the player to show the time remaining from the current player tape position (to find out if
there is sufficient space for a recording, for example).
To ensure the remaining time shown is accurate, select the length of cassette currently loaded by selecting
this function until you reach the correct length.
Accessing counter zero position
The player will wind to the position 0:00:00 and stop.
Resetting the counter to zero
COUNTER RESET
0:00:00
and ...
Dimmer : Your player dims its display when switched to stand-by mode.
Auto power off : Your player switches to stand-by when no tape is played and no station is received for more
than 5 minutes.
28
˘ ` 28 mac001 300DPI 120LPI
Time and date
counter
TAPE REMAIN
E-180
E-240
E-300
PR+/-:SELECT
OK:CONFIRM SETUP:END
Reset the counter.
STOP SP
14:00 14/10
• Remaining time display is
only possible when the
cassette is loaded.
E-240 01:27
REW SP
GO TO ZERO
0:02:13
PR01 ARD
STEREO ON
V E180 00:48