Daewoo SH-3510P Instruction Manual page 29

For timer recordings, clock, date, and stations must be set correctly.
Load a cassette with its safety tab in place and with sufficient free space for the recording.
Normal timer recording
Downloaded From Disc-Player.com Daewoo Manuals
Call up the player's "SETUP" menu and, choose "TIMER
PROGRAM".
1
Decide if you want to record "ONCE", "WEEKLY" or
"DAILY"...
... and confirm.
Type in one after the other:
• The programme location number;
2
• the time the broadcast starts,
• the time the broadcast ends,
• the day of the broadcast, if it is not today.
• Select LP if you wish to make a long play recording .
• Switch off VPS/PDC here if you need to .
If you wish to make changes:
Move to the position you want to change using the [œ œ /√ √ ]
3
buttons. Change the setting using the [PR+/- ] or [number]
buttons.
If all settings are ok, press [œ œ or √ √ ], till you see "OK :
CONFIRM" in the bottom line.
Confirm.
Switch your player off.
• Wait a few seconds after typing a one-digit-number.
• If you have made a mistake, move to the position you want to change using the [œ œ /√ √ ] buttons
and change the setting.
• If programme timings overlap, the machine will give a warning message. If you don't adjust
the times, the machine will record the first programme completely then continue with the
second one.
• If there is no sufficient free space for the recording on the cassette the video switches
automatically to "LP" for double recording capacity.
• The recorder will eject cassettes which have the safety tab removed.
• The player will be powered on and record the program at the set time.
• If the player is powered on after a timer recording has been set, the player cannot record in
VCR mode but can record in DVD mode.
Timer Recording
HOW OFTEN DO YOU WANT
TO RECORD THIS PROGRAM?
ONCE
WEEKLY(ONCE A WEEK)
DAILY(MON-FRI)
DAILY(MON-SAT)
DAILY(MON-SUN)
PR+/-:SELECT
OK:CONFIRM SETUP:END
TIMER PROGRAM (ONCE)
PR --
START TIME --:--
END TIME --:--
START DATE --/--
TAPE SPEED SP
VPS/PDC ON
PR+/-:SELECT(AV1/AV2)
0-9 :SETUP(PR)
/ :CORRECT SETUP:END
TIMER PROGRAM (ONCE)
PR 01
START TIME 18:10
END TIME 20:30
START DATE 20/08(FRI)
TAPE SPEED LP
VPS/PDC ON
PR+/-:SELECT(AV1/AV2)
0-9 : SETUP (PR)
/
:CORRECT
OK:CONFIRM SETUP:END
27