Table of Contents
Advertisement
More Functions
I The counter counts in real time from the point you load the cassette. This does not have to be its
beginning! The counter does not count unrecorded parts of the tape.
I If you rewind beyond the zero position, the counter counts in negative values (e.g. – 0:01:15).
Clock / counter display
Each time you press [DISPLAY] button,
Press 1x: Time and date+current status
Press 2x: Counter+current status
Press 3x: disappear.
But if you press [CLK/CNT] button, the display window will change to clock
or counter depending upon selection made.
• If you don't wind tape (PLAY, FF, REW,...), the tape remain time doesn't appear.
• If using a broadcast signal for timer recording, press the button to display the VPS/PDC icon.
Remaining time and cassette length
PR+/-:SELECT
OK:CONFIRM
When you want the player to show the time remaining from the current player tape position (to find out if
there is sufficient space for a recording, for example).
To ensure the remaining time shown is accurate, select the length of cassette currently loaded by selecting
the function and specifying the correct length.
Accessing counter zero position
The player will wind to the position 0:00:00 and stop.
Resetting the counter to zero
COUNTER RESET
0:00:00
30
Downloaded From Disc-Player.com Daewoo Manuals
Time and date
counter
TAPE CONTROL
TAPE REMAIN
TAPE REMAIN
E-180
GO TO ZERO
E-240
COUNTER RESET
E-300
INDEX+
INDEX-
PR+/-:SELECT
OK:CONFIRM
SETUP:END
SETUP:END
Reset the counter.
STOP SP
PR01
STEREO ON
14:00 08/06
V
E180 00:48
Call the player's "SETUP",
choose "TAPE CONTROL".
• Remaining time display is
only possible when the
E-240 01:27
cassette is loaded.
REW
SP
GO TO ZERO
0:02:13
ARD
Advertisement
Table of Contents
