Initial Installation - Daewoo SH-3510P Instruction Manual

Initial Installation

Switch the TV on.
You can also start "AUTO SET" in the SETUP "PR PRESET"
To tune in new stations (manual tuning) and to enter station names see page 24-25.
Setting up the player
1
2
3
4
• If you don´t see this picture, because you don´t use a SCART cable,
•
Downloaded From Disc-Player.com Daewoo Manuals
You should see this picture the first time you switch on the TV
and player.
OK for "AUTO SET!".
"AUTO SET" tunes in all the stations you can receive in your
country.
Clock is automatically set.
If other stations are positioned on near the current RF OUTPUT
CH, the guide message appears automatically.
The player recommends the optimal RF OUTPUT CH number
automatically.
Press the [OK] button to confirm the recommended PR.
Should you wish the stations to have the same numbers as those
used on the TV, follow the instructions in "Sorting programme
locations" on page 25.
Otherwise ...
exit the basic installation function and enjoy your player.
search this picture now (CH 52) with the station tuning functions of
your TV set (see its user manual).
In case of interference problems on CH 52, type in an
other transmission channel between 21 and 69 using
the number buttons.
"AUTO SET".
AUTO SET
OK:CONFIRM SETUP:END
CH 25
PLEASE WAIT...
SETUP:END
RF OUTPUT SET
CURRENT CH 52
RECOMMENDED CH 54
0-9:SELECT(21-69)
OK:CONFIRM SETUP:END
IMPORTANT!
PLEASE CHANGE THE TV
CH TO 54.
MANUAL SET
PR01 P-O1 PR08 P-08
PR02 P-02 PR09 P-09
PR03 P-03 PR10 P-10
PR04 P-04 PR11 P-11
PR05 P-05 PR12 ----
PR06 P-06 PR13 ----
PR07 P-07 PR14 ----
PR+/-:SELECT
OK:CONFIRM SETUP:END
17