Audio Setup - Daewoo SH-3510P Instruction Manual

Audio Setup

A user may select an audio menu according to the speaker set being used.
Downloaded From Disc-Player.com Daewoo Manuals
1
While in STOP or RESUME STOP mode,
press [SETUP] button.
Select a Digital Output.
2
Set audio output to coaxial or optical. You
can set the outgoing digital signal to
BITSTREAM or LPCM:
• BITSTREAM : The raw audio signal
recorded on the disc goes to the digital
audio output.
• LPCM : The decoded audio signal goes
to the digital audio output.
Select a Dynamic Range.
3
You can set the Dynamic Range as follows:
• Off : You can hear the sound as it was
originally recorded on the disc.
• Full : You can hear loud sounds softer
and soft sounds louder.
DIGITAL OUT BITSTREAM
DYNAMIC RANGE OFF
DIGITAL OUT BITSTREAM
DYNAMIC RANGE LPCM
DIGITAL OUT
DYNAMIC RANGE FULL
OFF
51