More Functions - Daewoo SD-3500P Owner's Manual

More Functions

I The counter counts in real time from the point you load the cassette. This does not have to be its
beginning! The counter does not count unrecorded parts of the tape.
I If you rewind beyond the zero position, the counter counts in negative values (e.g. – 0:01:15).
Clock / counter display
Each time you press [DISPLAY] button,
Press 1x: Time and date+current status
Press 2x: Counter+current status
Press 3x: disappear.
But if you press [CLK/CNT] button, the display window will change to clock
or counter depending upon selection made.
• If you don't wind tape (PLAY, FF, REW,...), the tape remain time doesn't appear.
• If using a broadcast signal for timer recording, press the button to display the VPS/PDC icon.
Remaining time and cassette length
TAPE CONTROL
TAPE REMAIN
GO TO ZERO
COUNTER RESET
INDEX+
INDEX-
PR+/-:SELECT
PR+/-:SELECT
OK:CONFIRM
OK:CONFIRM SETUP:END
When you want the player to show the time remaining from the current player tape position (to find out if
there is sufficient space for a recording, for example).
To ensure the remaining time shown is accurate, select the length of cassette currently loaded by selecting
the function and specifying the correct length.
Accessing counter zero position
The player will wind to the position 0:00:00 and stop.
Resetting the counter to zero
COUNTER RESET Reset the counter.
0:00:00
30
Time and date
counter
TAPE REMAIN
E-180
E-240
E-300
E-240 01:27
SETUP:END
STOP SP PR01 ARD
STEREO ON
14:00 08/06 V E180 00:48
Call the player's "SETUP",
choose "TAPE CONTROL".
• Remaining time display is
only possible when the
cassette is loaded.
REW SP
GO TO ZERO
0:02:13