Cleaning Tools; Cleaning And Maintenance; Error Detection - Champion CHDS310 User Manual

Cleaning tools

Crevice tool:
For cleaning corners, edges and other areas where is difficult to reach.
Sofa brush:
For cleaning bed, sofa etc.
Universal tool:
For cleaning on floors or carpets. Adjust the bristle depending on the surface.

Cleaning and maintenance

Empty the dust container
1. After removing the flexible hose, press the cover lock button and open the dust container.
2. Remove the dust bag from the container.
3. Replace the dust bag in the container.
4. Close the dust container and lock it into position.
Change filter
1. Replace the motor filter: Open the dust container and remove the motor filter. Fix the new filter in the position.
2. Replace the outlet filter: Detach the grille by pulling firmly away from the appliance, remove the outlet filter and replace
with the new filter. Fix the grille again.
3. Clean the filter: Clean the motor filter in water and allow it to dry completely before replacing it.

Error detection

Before you contact our services center, please check the following points:
Problem
Motor does not start
Suction power is weaker
The wire cannot be winded completely.
The wire cannot be drawn out.
Speed adjustment does not work.
The dust container cannot be closed.
Technical data
• Rated voltage: 220-240V AC
• Rated frequency: 50/60Hz
• Power: 750W
• Operating pressure: >18.0kPa
• Sound level: <76dB(A)
• Operating radius: 7M
Makadamgatan 14 I 254 64 Helsingborg I Sweden
Possible reason
- Power cord not firmly plugged into outlet.
- Outlet damaged.
- Product does not switch on.
- Unit clogged.
- Dust filter needs cleaning.
- Dust container not in position.
- Filter blocked.
- The wire may be tangled on the cable reel.
- The cable reel may be reversed.
- Appliance is defective.
- Dust filter is not in the correct position.
Champion ®
info@championnordic.se
Designed in Sweden I Assembled in China
Solution
- Plug unit firmly.
- Check the outlet.
- Switch on the appliance
- Remove the blockage.
- Clean the dust filter.
- Close the dust container.
- Clean the filter.
- Gently pull out the wire and try to
rewind again.
- Press the "rewind" button and try again
- Repare or service needed. Contact
reseller or service workshop.
- Fix the dust filter and try again.
EN