Simple Solutions - MagicBox Torque User Manual

S I M P L E S O LU T I O N S
The handset is not charging when the
handset is placed on the charger base
• Poor charging contact, move the handset slightly on
the base.
• Dirty contacts - Unplug from the mains power and
clean the charging contacts with a cloth (Do not get
wet, do not immerse in water)
No dialling tone
• No power - check the connections. Reset the base:
unplug and plug back in the mains power.
• Batteries are empty - charge the batteries for at least
24 hours. Replace the rechargeable batteries.
• You are too far from the base - move closer to the
base
• Wrong line cord - only use the telephone line cord
provided
Torque User Guide.indd Sec1:45 Torque User Guide.indd Sec1:45
• Micro fi lter (required if you have Broadband) is not
connected inbetween your telephone line cord and
the telephone wall socket - connect the micro fi lter to
your telephone line cord.
Poor audio quality
• The base is too close to electrical appliances,
reinforced concrete walls or metal door frames
- move the base at least one metre away from any
electrical appliances.
• Micro fi lter (required if you have Broadband) is not
connected inbetween your telephone line cord and
the telephone wall socket - connect the micro fi lter to
your telephone line cord.
The signal icon
• Handset is not registered to the base - register the
handset to the base
• You are too far from the base - move closer to the
base
• Check that the mains power is connected correctly.
45
is blinking
5/2/10 17:14:37 5/2/10 17:14:37