Using The Agenda - MagicBox Torque User Manual

U S I N G T H E A G E N D A
You can use your handset to remind you of details of
up to fi ve events such as birthdays, anniversaries or
appointments. Each entry can be up to 24 characters
long.
Add a new event
1. Press 'Menu' , scroll
2. If no previous event is stored, 'Add Event' , is
highlighted, press 'Select' .
Or
If events are already stored, they are listed. Press
'Options' , 'Add Event' is highlighted. Press 'Select' .
3. Enter the subject and press 'Save' .
4. Enter the date (DD/MM) and press 'Save' .
5. Enter the time, (HH:MM) and press 'Save' . If the
current time format setting is 12 hour, 'Select' am or
pm by pressing or
6. Press or to select 'Silent' or 'Alarm' and press
'Select' .
7. Press RED to return to standby.
Torque User Guide.indd Sec1:26 Torque User Guide.indd Sec1:26
to 'Agenda' and press 'Select' .
.
If you select alarm:
Scroll or to select 'Once' or 'Annually' and
press 'Select' .
Scroll or to select when you want to receive
the reminder 'At Event Time' or '30 Min Before' ,
press 'Select' .
RED to return to standby.
Press
NOTE
If you 'Select' a silent reminder, the event subject is
displayed on screen but no alarm will sound.
When the event memory is full, the display shows
'Memory Full' . You must delete an event before you
can add a new one.
Switch off agenda ring
1. The event is displayed. Press 'View' to stop the alarm
and see the details of the event. Or press 'Back' to
stop the alarm and return to the standby screen. If no
button is pressed, the alarm stops after one minute.
26
5/2/10 17:14:19 5/2/10 17:14:19