MagicBox Torque User Manual page 32

H A N D S E T S E T T I N G S
4. Scroll or to 'On' or 'Off ' . Press 'Select' to
confi rm.
5. Press RED to return to standby.
PBX access code
If your Torque handset is connected to a switchboard,
you may need to enter an access code for an outside
line, eg 9, before you dial a number. You can save
this access code in your Torque handset and it will be
added automatically each time you dial.
1. Press 'Menu' , scroll
2. 'Set Handset' is highlighted. Press 'Select' .
3. Scroll to 'PBX Access Code' and press 'Select' .
4. Scroll or to 'On' , 'Off ' or 'Set Code' . Press
'Select' to confi rm.
If you select 'Set code' , enter the switchboard access
code eg 9, then press 'Save' .
5. Press RED to return to standby.
Torque User Guide.indd Sec1:32 Torque User Guide.indd Sec1:32
to 'Settings' and press 'Select' .
32
5/2/10 17:14:26 5/2/10 17:14:26