MagicBox Torque User Manual page 36

R E G I S T R AT I O N
To select a base
You can register your Torque handset with up to
4 bases. Once registered, you can switch between
bases, for example, bases at home and at work.
1. Press 'Menu' , scroll
press 'Select' .
2. Scroll to 'Select Base' and press 'Select' .
3. All base numbers are displayed. (In use) is added
to bases where the handset has been previously
registered. Scroll
and press 'Select' .
4. 'Searching base... ' is displayed, followed by the
standby display for that base.
To De-register a handset
1. Press 'Menu' , scroll
press 'Select' .
2. Scroll to 'De-register' and press 'Select' .
3. Enter the system PIN (original PIN is 0000) and press OK.
Torque User Guide.indd Sec1:36 Torque User Guide.indd Sec1:36
or to 'Registration' and
or to the base you want
or to 'Registration' and
4. Scroll or to the handset you want to de-
register and press 'Select' .
5. Press 'Yes' to confi rm or 'No' to cancel. The display
confi rms de-registration.
6. Press RED to return to standby.
Internal Calls
Call another handset
If you have more than one handset registered to the
Torque base, you can make internal calls between
two handsets.
1. Press 'int' (bottom right of the keypad), followed by
the number of the handset (1-5) that you want to call.
2. Press OK to dial.
NOTE
When an internal call is received, the display shows
Internal Call Handset X (where X is the number of the
calling handset) .
36
5/2/10 17:14:30 5/2/10 17:14:30