Base Settings - MagicBox Torque User Manual

B A S E S E T T I N G S
Base ringtone
1. Press 'Menu' , scroll
2. Scroll to 'Set Base' . Press 'Select' .
3. 'Ringtone' is highlighted. Press 'Select' .
4. Scroll or to highlight the ringtone you want,
there are 5 to choose from. Press 'Select' to confi rm.
5. Press RED to return to standby.
Base ringer volume
1. Press 'Menu' , scroll
2. Scroll to 'Set Base' . Press 'Select' .
3. Scroll to 'Ringer Volume' . Press 'Select' .
4. Scroll or to display the volume level you
want. There are 5 volume levels plus 'Off ' . Press
'Select' to confi rm.
RED to return to standby.
5. Press
Dialling mode
Your Torque product is set to Tone dialling. You
should not normally need to change this setting. The
dial mode options are Tone or Pulse.
1. Press 'Menu' , scroll
Torque User Guide.indd Sec1:33 Torque User Guide.indd Sec1:33
to 'Settings' and press 'Select' .
to 'Settings' and press 'Select' .
to 'Settings' and press 'Select' .
2. Scroll to 'Set Base' . Press 'Select' .
3. Scroll o 'Dialling Mode' . Press 'Select' .
4. Press or to highlight 'Pulse' or 'Tone' . Press
'Select' to confi rm.
5. Press RED to return to standby.
Recall mode
The default recall time is suitable for your country
and network operator and is set at 100 ms (Recall 1).
1. Press 'Menu' , scroll
2. Scroll to 'Set Base' . Press 'Select'
3. Scroll to 'Recall Mode' . Press 'Select' .
4. Press or to highlight 'Recall 1' (100ms) or
'Recall 2' (250ms). Press 'Select' to confi rm.
5. Press RED to return to standby.
System PIN
The System PIN is used when changing certain
settings and for handset/base registration/de-
registration. The default setting is 0000 but you can
change this to your own personal PIN number with
up to 8 digits.
33
to 'Settings' and press 'Select' .
5/2/10 17:14:27 5/2/10 17:14:27