MagicBox Torque User Manual page 39

A N S W E R I N G M A C H I N E
On-screen alert
When you have new answering machine messages,
the screen shows 'You have X new messages. '
If 'Mood lighting' is switched on, this will also fl ash on
the base.
1. Press 'Play' , then scroll
of messages if there is more than one. All new
messages are indicated by a dot.
Press 'Play' to hear the highlighted message.
Outgoing messages (OGM)
The outgoing message is the message a caller fi rst
hears when the answering machine picks up their
call. There are 2 pre-recorded outgoing messages
to choose from or you can record your own up to 3
minutes long. You can only record your outgoing
message using the handset.
Torque User Guide.indd Sec1:39 Torque User Guide.indd Sec1:39
or through the list
Answer & Record
The caller can leave a message. The pre-recorded
message is 'Hello, your call cannot be taken at
this moment, so please leave your message after
the tone. '
Answer Only
The caller can listen to your announcement but
cannot leave a message. The pre-recorded message is
'Hello, your call cannot be taken at this moment, and
you cannot leave a message, so please call later' .
Record your own outgoing message
1. Press 'Menu' and scroll
press 'Select' .
2. Scroll to 'Outgoing Message' and press 'Select' .
3. 'Record' is highlighted. Press 'Select' .
4. Scroll or to 'Answer & Record' or 'Answer
Only' and press 'Select' .
5. You will hear 'Please Speak after the Tone' and this is
also displayed on the handset.
39 39
to 'Answer Machine' and
5/2/10 17:14:33 5/2/10 17:14:33