Table of Contents
Advertisement
Putting into operation | Operating instructions
EN
5
ATTENTION: If the power cord or power plug are in any way damaged by an external
action, do not repair the power cord and contact an authorised service centre!
ATTENTION: This repair should only be performed by an authorised service centre.
4. OPERATING INSTRUCTIONS
Purpose of use
This pump may be used anywhere, where you wish to transfer water from one location to another,
e.g. at home, agriculture, gardening, plumbing and for many other applications.
This product is designed for private household use.
It is not suitable for professional use.
The submersible pump is suitable for work with water in a water distribution system and for chlorinated pool
water.
It is not suitable for work with waste water in sewage systems, salt water, aggressive or easily combustible
substances, for work in food processing or as a pump for water jets on garden ponds.
It is not designed for pumping drinking water!
Instructions for use
ATTENTION: Before setting up the machine or carrying out maintenance on the machine, or if the electric
power cable has become jammed or is damaged, always disconnect it from the electric power socket!
Before using the submersible pump, please fi rst carefully read all the safety instructions and instructions
for use for the pump. Only after reading these instructions will you be able to safely and reliably use all the
functions of the pump. You must conform to all local regulations in force in your country. These regulations
are effective together with the particulars specifi ed in these instructions.
ATTENTION: If you will be using the pump near pools or garden ponds, or in their
protective zone, the electrical grid must be equipped with a circuit breaker.
The pump must not be used, if there are people in the pool or garden pond! Also do
not use it if there are fi sh or other living creatures in the pool or garden pond.
Contact an expert company for installation.
The submersible pump is designed to pump water at a maximum temperature of 35 °C.
The pump must not be used for other liquids, particularly motor oils, cleaning agents and other chemical
products!
Electrical safety
The pump can be connected to any power plug installed according to given norms.
The plug must be powered at 230 V ~ 50 Hz.
FVC 2001-EC / FVC 2003-EK
Advertisement
Table of Contents
