Required Tools and Equipment
The following list is a summary of the tools and equipment required by
the procedures in this manual.
Phillips screwdrivers
Flat-head screwdrivers
Digital multi-meter
Allen wrench set (Metric)
Open-end wrenches of assorted sizes (Metric)
½" drive ratchet and sockets of assorted sizes
Bearing loctite
Cable ties
Needle nose pliers
Damp cloth
Rubber mallet
Drop cloth (to protect floor surfaces)
Ruler
Snap ring pliers
Wire cutters
Drive belt tension gauge*
Crank Puller*
Bearing Extractor*
* Available through Horizon Fitness at cost.
8