No Rpm, Speed Or Watts Readout - Horizon Fitness E51 Service Manual

Only Time Works On Console
(No workload, distance, etc.)
Possible causes:
1. Poor connection between sensor wire and console (all models).
2. Missing rpm magnet on crank assembly (all models).
3. Defective sensor wire (all models).
4. Defective console (all models).
Fix:
1. Verify proper connection between sensor wire and console by
removing console and snapping console wire and sensor wires
together firmly (Manual Resistance). For all other models, remove
the side cover and verify that the sensor wire is properly connected to
the console cable connection.
2. Verify that magnet is installed in crank assembly.
3. Inspect sensor wire for damage. Check continuity of rpm sensor wire
(see sensor wire continuity checkpoint in table of contents). Replace
if defective.
4. If problem persists, replace console.
14