Horizon Fitness E51 Service Manual page 42

21. Attach the crank disk and crank arm to the crank axle. Place black
cap onto the center of the crank disk.
22. Attach pedal arm onto crank arm. Replace nut attaching pedal arm to
crank arm (using 17mm wrench).
23. Replace pedal arm cap.
24. Attach the lower handlebar to the pedal arm and secure with a 5mm
nut and washers.
25. Attach the lower handlebar to the lower link arm using the 13mm nut
and associated bolt.
26. Test ride elliptical to make sure it is working correctly.
42