SPEAKERS
CONSOLE
UPPER HANDLEBAR
Endurance5i
PULSE GRIPS
WATER BOTTLE HOLDER
TOP CAP
PEDAL ARM
CRANK
PIVOTING FOOT PADS
INCLINE COVER
REAR COVER
6
TOUCH PAD PANEL AND DISPLAY WINDOWS
LOWER HANDLEBAR
ON/OFF SWITCH
POWER CORD SOCKET
STABILIZER TUBE
MAIN FRAME
LOWER LINK ARM
GUIDE RAIL SET
pre ASSEMBLY
toolS inclUDeD:
F Screwdriver
UnpacKinG
F 8 mm L-Wrench
F 6 mm L-Wrench
Unpack the product where you will be using it. Place the elliptical carton on a level flat
F 5 mm L-Wrench
surface. It is recommended that you place a protective covering on your floor. Never
F 13/15 mm Flat Wrench
open box when it is on its side.
partS inclUDeD:
NOTE: during each assembly step, ensure that ALL nuts and bolts are in place and
partially threaded in before completely tightening any ONE bolt.
F 1 Main Frame
NOTE: A light application of grease may aid in the installation of hardware. Any grease,
F 1 Stabilizer Tube
such as lithium bike grease is recommended.
F 1 guide Rail Set
F 2 Pedal Arms
F 2 Lower Handlebars
F 2 Upper Handlebars
F 2 Lower Link Arms With Footpads
F 1 Top Cap
F 1 Top Cap Rear Cover (Endurance 4, Endurance 5i only)
F 1 Console Mast
F 1 Console Mast Boot
F 1 Console
F 2 Handlebar Caps
F 1 Water Bottle Holder
F 1 Rear Cover (Endurance 5i only)
F 1 Audio Adapter Cable
F 1 Power Cord
F 7 Hardware Bags
neeD Help?
If you have questions or if
there are any missing parts,
contact Customer Tech
Support.
all
MoDelS
7