Advertisement
Excellent maintenance characteristics and
global compatibility.
Powerful support for startup and maintenance and designed for worldwide use.
Image storage function (A210, A110)
The A Series can store up to 30 defect images, and with the dedicated software
tools you analyze the cause of defects at remote locations using e-mail.
Storing up to 30 pictures* of fault occurrences in its memory, it possible for
analyzing error causes and making adjustments. When setting up the
equipment, inspection images are stored and can be used when making new
adjustments and changes. Moreover, the stored images can be used for testing.
Also, using special software, image data and inspection conditions can be
stored, and then faults can be analyzed and adjustments made at any location
using e-mail. Furthermore, the location of all errors are clearly displayed and
illuminated so that they can be seen at a glance.
OK
NG
OK
NG
NG
Image storage
30
images
Readjustment and
Can be stored
ENTER
re-testing analysis
to hard disk or
C
takes place using
e-mailed using
the stored images.
special software
*A210 = 30 image, A110 = 8 images
Setup help function
Quantitative support for settings that once relied on intuition.
With the setup help function, focusing, brightness adjustment, exposure
adjustment, binary level settings, and other adjustments that used to be
performed by the operator's professional experience, these adjustments can now
be performed quantitatively. Equipped with an input monitor and test output
functions, connections to external equipment are also greatly simplified. Great
savings can be made in debugging and adjustment by the combination of the trap
function, which halts inspection when an error is found, and the image storage
and spreadsheet functions.
Global application
English-Japanese interchange and CE certification
Displays for the one controller can be set to either English or Japanese to allow
use in a great number of countries around the globe. The controller and high-
speed random trigger camera are standard products and are certified with CE
markings.
8
I Vision Backup-Tool Ver.2
The product data created with the MICRO-IMAGECHECKER A
series and the image data stored in the controller can be stored
on a PC using Windows.
Stored data can be restored to the A series controller.
*
However, it is not possible to directly restore type data backed up
using Vision Backup-Tool with the previous product (Ver. 1) to V2
(Ver. 2). In this case, use the dedicated data conversion software
(freeware) to convert the Ver. 1 type data for V2 use, then transfer it
to V2 and perform a backup again. If you require the data conversion
software, contact your Matsushita Automation Controls Co. Ltd.
representative.
Focus adjustment
Aperture adjustment
Binarization adjustment
English
Japanese
EMC(89/336/EEC)
Video game
EN50081-2:1993
style control
EN50082-2:1995
11/2004
MICRO-IMAGECHECKER
I Dimensions (unit: mm)
G A110/A210 Controller
ANMA212V2/ANMA212
ANMA112V2/ANMA112
(10)
74
G Double-speed random camera: C mount
ANM831
54.5
31
46.5
8
19
24.5±0.6
4-M3
1/4-20UNC
31
2-M3(depth 4mm)
13
(depth 2.5mm)
(depth 9mm)
24.5±0.6
(3.25)
(19)
(31.3)
Without mounting bracket
With mounting bracket
G Operating key pad
ANM8520
54.4
46
ANM8520 CE
: Length of cable
ENTER
C
*A
*A: Approximated length of cable for keypad used
ø11.5
The cable is slightly shorter on keypads with
CE marking.
G Lens
C Mount lens
A
φ
ANB842
f=6.5
=48
φ
ANB843(L)
f=8.5
=42
φ
Mounting screws (locked lens only)
ANB845N(L)
f=16
=30
φ
ANB846N(L)
f=25
=30
φ
ANB88161
f=16
=30.5
φ
ANB88251
f=25
=30.5
φ
ANB847(L)
f=50
=48
φ
ANM8850
f=50
=27.5
A
φ
ANM88501
f=50
=30.5
CS Mount lens
A
φ
ANM8808
f=8
=34
φ
ANM88081
f=8
=31
B
φ
ANM8804
f=4
=34
φ
ANM88041
f=4
=31
φ
ANM8828
f=2.8
=34
φ
ANM88281
f=2.8
=31
®
A210
A110 MultiChecker V2 Series
•
(5.5)
40
55
4-M3 depth1.5
The A110 does not have a
camera B port
G CS mount camera: CS mount
ANM832/ANM832CE/ANM83203
49.5
8
*1)
(43)
31
14
24.5±0.2
2-M3 (depth 7mm)
4-M3(depth 2.5mm)
18.15
8
32.15
2-M3(depth 4mm)
*1) ANM832: 3000
+80
–10
*1)
ANM832CE: 2780
+80
Without mounting bracket
–10
With mounting bracket
*1)
ANM83203: 300
+40
–10
G Monitor (Panasonic: GPBM910)
AUGPBM910 (100 V AC)
V-HOLD
BLIGHT
CONTRAST
Panasonic
Video Monitor GP-BM
29
180
36.5
36.5
148
Approx. 80 mm, including
cable connection
Note:
Allow 80 mm behind the monitor for wiring
and heat radiation.
Monitor input/output uses a BNC terminal.
B
G Camera cable
42
ANM84303/ANM84303CE
40
ANM840
A
33
ANM840
ACE
37.3
: Length of cable
25
*B
25.5
48
38.5
(43)
38.5
ø14.7
B
35
35
41
40
*B: Approximated length of cable used
38
The cable is slightly shorter on keypads with
37.5
CE marking.
11/2004
38
28±0.2
1/4-20UNC
depth 10mm
259
50
9
Advertisement
