Assembly And Adjustment - Stanley STGS9100 Owner's Manual

ENGLISH
Package Content
This product package includes:
1 Angle grinder
1 Guard
1 Flange set
1 Spanner
1 Handle
1 Instruction manual
• Check t he tool, parts, and accessories to see if they are
damaged during transportation.
• Take a f ew moments to read and understand this
manual before using the tool.
Description (Fig. 1)
Warning: Never modify the power tool or any
part of the tool, otherwise it may cause damage
to the tool or result in personal injury.
a. ON/OFF switch
b. Spindle lock
c. Guard
Purpose of Design
This angle grinder is designed especially for grinding.
Do not use sandpaper discs and grinding wheels other than
those with depressed center.
8
(Original instructions)
Do not use the tool in wet conditions or environments in the
presence of flammable liquids or gases.
This heavy-duty angle grinder is a professional power tool.
Do not allow children to come in contact with this tool.
Inexperienced operators are required to use this tool under
supervision.
Electrical Equipment Safety
Only one voltage is applicable to this tool. Be sure to check
that the power suuply corresponds to the voltage on the
rating plate.
When the power cord is damaged, have it sent to a
STANLEY service center for replacement to specially
prepared cables.
Using Extension Cords
If an extension cord is required, please select a 3-phase
extension cord that has been inspected and matches the
input power (see Technical Data) of this tool. The minimum
conductor size is 1.5mm
When using a cable reel, be sure to pull out all the cables.

Assembly and Adjustment

power and disconnect all plugs before adjusting or
removing/installing any accessory. Before reassembling
the tool, press and release the trigger switch to make sure
the tool is already switched off.
Your STANLEY tool is equipped with double
insulation, hence, it does not require to be
earthed.
2 , maximum length is 30 meters.
Warning: To minimize the danger of serious
personal injury, please switch off the tool