Replacing the status-light
board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
Procedure
1
Slide the status-light board under the speaker cable.
2
Place the status-light board into the slot on the palm-rest assembly.
3
Adhere the foam that secures the status-light board to the palm-rest
assembly.
4
Slide the status-light board cable into the connector on the keyboard
daughter-board and close the latch to secure the cable.
5
Route the speaker cable through the routing guides on the palm-rest
assembly.
Post-requisites
1
Replace the battery.
2
Replace the
base
computer. After working inside your
cover.
After working inside your
53