Replacing the display panel
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
Procedure
1
Place the display panel on a flat surface.
2
Replace the
display
3
Replace the
sensor
4
Replace the
touch-screen
5
Replace the camera.
6
Turn the display-panel assembly over.
7
Route the display cable through the routing guide inside the hinge cover.
8
Align the tabs on the display-panel assembly with the slots on the display
back-cover and antenna assembly and gently snap the display-panel
assembly into place.
Post-requisites
1
Replace the
display
2
Replace the
wireless
3
Replace the battery.
4
Replace the
base
computer. After working inside your
cable.
board.
board.
assembly.
card.
cover.
After working inside your
101