Replacing the keyboard
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
Procedure
1
Align the screw holes on the keyboard with the screw holes on the palm-
rest assembly.
2
Slide the keyboard cable and the keyboard-backlight cable into their
respective connectors on the keyboard daughter-board and close the
latches to secure the cables.
3
Replace the screws that secure the keyboard to the palm-rest assembly.
4
Align the screw holes on the keyboard bracket with the screw holes on
the palm-rest assembly.
5
Replace the screws that secure the keyboard bracket to the palm-rest
assembly.
6
Adhere the tapes that secure the keyboard bracket to the palm-rest
assembly.
Post-requisites
1
Replace the
system
2
Replace the
power-adapter
3
Replace the
I/O
4
Replace the
heat
5
Replace the
graphics
6
Replace the
display
7
Replace the fan.
8
Replace the
wireless
9
Replace the
solid-state
10 Replace the
memory
computer. After working inside your
board.
port.
board.
sink.
daughter-board.
assembly.
card.
drive.
modules.
After working inside your
93