D-Link DCS-2630L User Manual page 27

Section 3 - Configuration
SD Recording Notifications is a feature to record video to the microSD card when motion is
detected. The microSD card must be formatted for use with the camera prior to running the
wizard. This can be done by using the format option found under SD Management. For more
details, please refer to SD Management on page 46.
Enable: Check this box to enable the SD Recording function.
Only During: Check this box to setup a scheduled timeframe when recording should
take place. This is useful if you do not want to be recorded when it would
otherwise be inconvenient, such as during the night or on weekends.
SD Recording The SD Recording Wizard uses Profile 2 by default. More information
Type: about video profiles can be found in Audio and Video on page 33. You
can set the file type from the drop down menu. You can also specify how
many seconds before and after the event should be recorded, as well as
how long the maximum duration of the video clip should be in minutes.
Keep Free Set amount of space to keep free on the microSD card.
Space:
Cyclic
When this option is selected, it will cause the oldest snapshot/video files
to be deleted when the system requires storage space for new snapshot/
video files.
Click Next to continue.
A summary of the options you selected is displayed for confirmation. If you are happy with
the selected configuration, click Apply. Otherwise, click Back to make the required changes.
D-Link DCS-2630L User Manual 27