D-Link DCS-2630L User Manual

D-Link DCS-2630L User Manual

Full hd ultra-wide view wi-fi camera
Hide thumbs Also See for DCS-2630L:

Advertisement

Version 1.00 | October 14, 2015

User Manual

Full HD Ultra-Wide View
Wi-Fi Camera
DCS-2630L

Advertisement

Table of Contents
loading

Summary of Contents for D-Link DCS-2630L

  • Page 1: User Manual

    Version 1.00 | October 14, 2015 User Manual Full HD Ultra-Wide View Wi-Fi Camera DCS-2630L...
  • Page 2: Preface

    Preface D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any person or organization of such revisions or changes. Information in this document may become obsolete as our services and websites develop and change. Please refer to http://www.mydlink.com for the most current information.
  • Page 3: Table Of Contents

    Using the Configuration Interface ........15 Technical Specifications ..........50 Contacting Technical Support ........52 Live Video ................16 Setup ..................17 Warranty ..............53 Registration ...............58 Setup Wizard ..............17 Network ................25 Router Connection ............28 Dynamic DNS ..............29 Image Setup ..............30 Audio and Video ..............31 D-Link DCS-2630L User Manual...
  • Page 4: Product Overview

    Section 1: Product Overview Product Overview Package Contents DCS-2630L Full HD Ultra-Wide View Wi-Fi Camera Power Adapter Mounting Kit Quick Install Guide If any of the above items are missing, please contact your reseller. Note: Using a power supply with a different voltage than the one included with your product will cause damage and void the warranty for this product.
  • Page 5: Introduction

    Introduction The Full HD Ultra-Wide View Wi-Fi Camera (DCS-2630L) with 180-degree Wide Eye lens keeps a vigilant eye on your home and provides crisp HD 1080p video to watch your kids or pets with wall-to-wall coverage. Night vision allows you to see in total darkness and with 2-way audio and PIR sensor, you can be notified when sound or motion is detected.
  • Page 6: Features

    2 Use of audio or video equipment for recording the image or audio of a person without their knowledge and consent is prohibited in certain states or jurisdictions. The end-user assumes all liability for compliance with applicable state, local and federal laws. D-Link DCS-2630L User Manual...
  • Page 7: Hardware Overview

    Used to illuminate the camera's field of view at night. Power Connector Connects to the included 5 V DC power adapter. Microphone Records audio from the surrounding area. Camera Lens Records video of the surrounding area. PIR Sensor Passive Infrared sensor for motion detection. D-Link DCS-2630L User Manual...
  • Page 8: Rear

    Insert a microSD card (not included) to store video files directly to the camera. Reset Button Press and hold this button for 10 seconds to reset the camera back to the factory default settings. Camera Stand Use as a camera stand or a mounting bracket. D-Link DCS-2630L User Manual...
  • Page 9: Wireless Installation Considerations

    Wireless Installation Considerations This D-Link device can connect to your wireless network from anywhere within the operating range of your wireless network. However, the number, thickness and location of walls, ceilings, or other objects that the wireless signals must pass through, may limit the range.
  • Page 10: Installation

    Store, Google Play or Windows Phone Store. Launch the mydlink Lite app, then create a new account or log in to your existing account. The app will guide you through the rest of the configuration process. D-Link DCS-2630L User Manual...
  • Page 11: Zero Configuration Setup

    Note: The Zero Configuration Setup will only work with a registered D-Link Cloud Router and an active mydlink account. Step 1: Attach the power supply to the power input on the DCS-2630L and connect it to a wall outlet or power strip. Power is confirmed when the Status LED is lit.
  • Page 12: Mount The Camera

    Use the supplied screws to attach the camera to the surface of the wall. Note: Do not overtighten the screws as this may crack the mount. D-Link DCS-2630L User Manual...
  • Page 13 5. Attach the base cover and turn it clockwise to lock it in place. 6. Adjust the angle of the camera as desired and then attached the power supply to the camera and plug into a power outlet. D-Link DCS-2630L User Manual...
  • Page 14: Mydlink

    After registering your DCS-2630L camera with a mydlink account in the Camera Installation Wizard, you will be able to remotely access your camera from the www.mydlink.com website. After signing in to your mydlink account, you will see a screen similar...
  • Page 15: Configuration

    After installing and setting up your camera with the mydlink Lite app, you are ready to use your camera. The camera’s built-in Web configuration utility is designed to allow you to easily access and configure your DCS-2630L. To log in, open a web browser on your PC to go to http://www.mydlink.com and log in to your account. Select your camera, click on the Settings tab, then click on the Advanced Settings button.
  • Page 16: Live Video

    Video Profile 1 Record a Video Clip Video Profile 2 Set a Storage Folder Video Profile 3 Listen/Stop Audio In (from microphone) Full screen mode Start/Stop Audio Out (to speaker) Take a Snapshot Digital Zoom Level (1x/2x/4x/8x) D-Link DCS-2630L User Manual...
  • Page 17: Setup

    Motion Detection Setup Wizard. Refer to Wizard: instructions for "Motion Detection Setup Wizard" on page Manual Click to manually set up your camera’s motion detection Motion settings, or to modify the settings. Refer to "Motion Detection Setup: Detection" on page D-Link DCS-2630L User Manual...
  • Page 18: Internet Connection Setup Wizard

    Address (DHCP) or select Static IP Address to manually assign the camera its IP settings. Step 1 The Internet Connection Setup Wizard will guide you through a step-by-step process to configure your DCS-2630L and connect it the Internet. Click Next to continue. Step 2 Select Automatic IP Address if you want your DHCP server (usually enabled on your router) to assign the camera its IP settings.
  • Page 19 You can specify how often the camera notifies the DDNS server of its current global IP address by entering a whole number representing hours. Click Next to continue. Step 4 Enter a unique name for your camera and click Next to continue. D-Link DCS-2630L User Manual...
  • Page 20 A summary of your camera settings is displayed for confirmation. If the settings are incorrect, click Back to make changes. Otherwise click Apply. Note: Make a note of the camera's IP address so you can access it on your network or by using a web browser. D-Link DCS-2630L User Manual...
  • Page 21: Motion Detection Setup Wizard

    Clear if you want to erase the area. 6. Click Next to continue. Refer to "Motion Detection" on page 39 for details about how to specify the detection sensitivity and adjust the camera’s ability to detect movement. Click Next to continue. D-Link DCS-2630L User Manual...
  • Page 22 Check the Enable box and then select a schedule (check the Only during box), the snapshot type, and the method of sending you the alert (FTP or E-mail). Please refer to "Snapshot" on page 35 for more information. Click Next to continue. D-Link DCS-2630L User Manual...
  • Page 23 Check the Enable box and then select a schedule (check the Only during box), the video clip type, and the method of sending you the alert (FTP or E-mail). Please refer to "Video Clip" on page 34 for more information. Click Next to continue. D-Link DCS-2630L User Manual...
  • Page 24 You have completed the Motion Detection Wizard. Review your settings, and click on Back if you need to make modifications. If settings are correct, click Apply to save them. Please wait a few moments while the camera saves your settings and restarts. D-Link DCS-2630L User Manual...
  • Page 25: Network

    User Name & Enter the user name and password for your PPPoE account. Re- Password: enter your password to verify. You may obtain this information from your ISP. PPPoE Status: Displays the status as active or inactive. D-Link DCS-2630L User Manual...
  • Page 26 Length: Default Gateway: Enter the default gateway address. Optional Primary/ You can enter a primary and/or secondary DNS server address(es) or if Secondary DNS: left blank your router will use the DNS server(s) from your ISP. D-Link DCS-2630L User Manual...
  • Page 27 (Universal Plug and Play) device on your network. Enable UPnP Port Enabling this setting allows the camera to add port forwarding entries Forwarding: into the router automatically. Bonjour: Enable to allow discovery of your camera by Apple devices. D-Link DCS-2630L User Manual...
  • Page 28: Router Connection

    Infrastructure is normally used to connect to an access point or router. Security Mode: Select the authentication you use on your wireless network: WPA- PSK or WPA2-PSK. Encryption: Select either AES or TKIP. Key: Enter the Wi-Fi password. D-Link DCS-2630L User Manual...
  • Page 29: Dynamic Dns

    DDNS account. Password: Enter the password used to connect to your DDNS server account. Timeout: Enter the DNS timeout values you wish to use. Status: Indicates the connection status, which is automatically determined by the system. D-Link DCS-2630L User Manual...
  • Page 30: Image Setup

    Frequency: This option adjusts the camera sensor's setting to avoid the image flickering under certain light sources, such as florescent lights. Reset Default: Click to reset all the settings on this page to the default values. D-Link DCS-2630L User Manual...
  • Page 31: Audio And Video

    Available on Profile 2 only. Select one of five levels of image quality: Highest, High, Medium, Low, and Lowest. The URL used to connect to the camera when viewing RTSP URL: from QuickTime or a mobile device. D-Link DCS-2630L User Manual...
  • Page 32 The camera will use night mode for all times outside of this schedule. Allows you to enable or disable, and adjust the volume levels of Audio Setup: both the speaker and microphone D-Link DCS-2630L User Manual...
  • Page 33: Time And Date

    Enable this feature to obtain time automatically from an NTP server. NTP Server: Network Time Protocol (NTP) synchronizes the DCS-2630L with an Internet time server. Choose the one that is closest to your location. Set the Date and Time Manually: This option allows you to set the time and date manually.
  • Page 34: Video Clip

    Target: Select where you want the video clip to be sent. It may be uploaded to an FTP server or sent to an email address. You will need to enter your FTP or email server/account settings. D-Link DCS-2630L User Manual...
  • Page 35: Snapshot

    1 or 2 second interval between them. Target: Select where you want the snapshot to be sent. It may be uploaded to an FTP or sent to an email address. You will need to enter your FTP or email server/account settings. D-Link DCS-2630L User Manual...
  • Page 36: Ip Filter

    IP range, then click Add to create a new filter. Administrator IP You can allow a single IP address to always have access to this Address: camera, regardless of the IP filter rules being used, by enabling this option and entering the IP address. D-Link DCS-2630L User Manual...
  • Page 37: Https Setup

    General information and the status of the current HTTPS certificate Information: is displayed. If you would like to see more detailed information, click Property. If you would like to remove the certificate, click Remove. Click Save Settings to save your changes D-Link DCS-2630L User Manual...
  • Page 38: Sd Recording

    This sets the capacity of your microSD card to prevent the system from becoming unstable. Cyclic: Selecting this option will cause the oldest file to be deleted when the system requires storage space for new files. D-Link DCS-2630L User Manual...
  • Page 39: Motion Detection

    No Motion Motion The motion notification will continue to blink as long as motion is detected. If no additional motion is detected, it will return to its original state after eight seconds. D-Link DCS-2630L User Manual...
  • Page 40: Sound Detection

    Select the value from the drop-down menu. The higher the number, the less sensitivity will be required to trigger an event. After making any changes, click Save Settings, or click Don’t Save Settings to discard your changes. D-Link DCS-2630L User Manual...
  • Page 41: Sd Management

    Click the checkbox in front of the Delete button to select all the files and catalogs below. Click Delete to remove files which are selected. Name: The name of the file. Size: The file’s size. Refresh: Click to refresh the page. Pages: Show the current and total pages. D-Link DCS-2630L User Manual...
  • Page 42: Maintenance

    Delete. RTSP Authentication: Check to enable RTSP streaming. HTTP Authentication: Check to enable HTTP streaming. Select Enable to allow access to the current camera snapshot Snapshot URL Authentication: via the web address indicated. D-Link DCS-2630L User Manual...
  • Page 43 Time Stamp: Select this option to enable the time-stamp display on the video screen. Power/LED Light: Select On or Off to indicate whether or not you want the status LED on the camera to function. Click Save. D-Link DCS-2630L User Manual...
  • Page 44: System

    You may reset your camera and restore the factory default settings by clicking Restore Factory Defaults. Reboot Device: This will restart your camera. Schedule Device Reboot: Select the day(s) and time you want to have the camera reboot. Click Save to activate. D-Link DCS-2630L User Manual...
  • Page 45: Firmware Upgrade

    Firmware Upgrade To upgrade the firmware on your DCS-2630L, please download and save the latest firmware version from the D-Link Support Page to your local hard drive. Locate the file on your local hard drive by clicking the Browse button. Select the file and click the Upload button to start upgrading the firmware.
  • Page 46: Status

    Section 4: Configuration Status Device Info This page displays detailed information about your device and network connection. D-Link DCS-2630L User Manual...
  • Page 47: Log

    Section 4: Configuration This page displays the log information of your camera. You may download the information by clicking Download. You may also click Clear to delete the saved log information. D-Link DCS-2630L User Manual...
  • Page 48: Help

    Section 4: Configuration Help This page provides helpful information regarding camera operation. D-Link DCS-2630L User Manual...
  • Page 49: Troubleshooting

    • Any movements from an object with a normal body temperature, like humans or animals, can be detected. To avoid any malfunctions, install this camera at the proper height. • Install this camera on a firm, static, anti-shock surface. D-Link DCS-2630L User Manual...
  • Page 50: Technical Specifications

    ƒ UPnP Port Forwarding ƒ DDNS Client (D-Link) ƒ LLTD ƒ SMTP Client ƒ HTTPS (for configuration) ƒ FTP Client ƒ Bonjour ƒ Administrator and user group protection Security ƒ HTTP and RTSP digest encryption ƒ Password authentication D-Link DCS-2630L User Manual...
  • Page 51 F (-20 to 70 ƒ Operating: 20% to 80% non-condensing Humidity ƒ Storage: 5% to 95% non-condensing ƒ CE ƒ FCC (Class B) Certifications ƒ CE LVD ƒ ICES Dimensions ƒ 3.37 x 3.37 x 5.53 inches D-Link DCS-2630L User Manual...
  • Page 52: Contacting Technical Support

    • Hardware Revision (located on the label on the bottom of the Network Camera (e.g. rev A1)) • Serial Number (s/n number located on the label on the bottom of the Network Camera). You can find software updates and user documentation on the D-Link website as well as frequently asked questions and answers to technical issues.
  • Page 53: Warranty

    Any repair or replacement will be rendered by D-Link at an Authorized D-Link Service Office. The replacement hardware need not be new or have an identical make, model or part. D-Link may, at its option, replace the defective Hardware or any part thereof with any reconditioned product that D-Link reasonably determines is substantially equivalent (or superior) in all material respects to the defective Hardware.
  • Page 54 D-Link further warrants that, during the Software Warranty Period, the magnetic media on which D-Link delivers the Software will be free of physical defects. The customer’s sole and exclusive remedy and the entire liability of D-Link and its suppliers under this Limited Warranty will be, at D-Link’s option, to replace the non-conforming Software (or defective media) with software that substantially conforms to D-Link’s...
  • Page 55 D-Link Systems, Inc., 17595 Mt. Herrmann, Fountain Valley, CA 92708. D-Link will not be held responsible for any packages that are lost in transit to D-Link. The repaired or replaced packages will be shipped to the customer via UPS Ground or any common carrier selected by D-Link.
  • Page 56: Limitation Of Liability

    FOR WARRANTY SERVICE) RESULTING FROM THE USE OF THE PRODUCT, RELATING TO WARRANTY SERVICE, OR ARISING OUT OF ANY BREACH OF THIS LIMITED WARRANTY, EVEN IF D-LINK HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE SOLE REMEDY FOR A BREACH OF THE FOREGOING LIMITED WARRANTY IS REPAIR, REPLACEMENT OR REFUND OF THE DEFECTIVE OR NONCONFORMING PRODUCT.
  • Page 57 The availability of some specific channels and/or operational frequency bands are country dependent and are firmware programmed at the factory to match the intended destination. The firmware setting is not accessible by the end user. For detailed warranty information applicable to products purchased outside the United States, please contact the corresponding local D-Link office.
  • Page 58: Registration

    Appendix D: Registration Registration Product registration is entirely voluntary and failure to complete or return this form will not diminish your warranty rights. Version 1.00 October 14, 2015 D-Link DCS-2630L User Manual...

Table of Contents