Network - D-Link DCS-2630L User Manual

Full hd ultra-wide view wi-fi camera
Hide thumbs Also See for DCS-2630L:
Table of Contents

Advertisement

Section 3 - Configuration
This section allows you to configure your network settings.
Automatic IP
Select this connection if you have a DHCP server running on your network
Address:
and would like a dynamic IP address to be updated to your camera
automatically.
Static IP
You may obtain a static or fixed IP address and other network information
Address:
from your network administrator for your camera.
IPv4 Address: Enter the IP address that the camera will use on your
network. You may need to get this information from your ISP or network
administrator.
Subnet Mask: The default value is "255.255.255.0. " Used to determine if
the destination is part of the same subnet.
Default Gateway: The gateway used to forward frames to destinations
in a different subnet. Invalid gateway settings may cause the failure of
transmissions to a different subnet.
Optional Primary DNS: Primary domain name server that translates
names to IP addresses.
Optional Secondary DNS: Secondary domain name server to backup the
Primary DNS.
PPPoE
If you are using a PPPoE connection, enable it and enter the User Name
Settings:
and Password for your PPPoE account. You can get this information from
your Internet service provider (ISP).
IPv6 Settings:
Select Automatic IP Address to automatically get an IPv6 address from
your router. If you have a static or fixed IP from your network administrator,
select Static IP address and enter the information provided by your ISP or
network administrator.
D-Link DCS-2630L User Manual

Network

28

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents