Snapshot - D-Link DCS-2630L User Manual

Section 3 - Configuration
The snapshot feature lets you send image snapshots via FTP or e-mail when a trigger is activated. You can send snapshots to both an FTP server
and an e-mail address.

Snapshot:

Check this box to enable the Snapshot function.
Trigger By: Select whether to record a snapshot when triggered by Motion or Sound,
according to a Schedule, or Always record.
• Motion: Enables recording when motion is detected. You can limit
motion-triggered recording to a specific schedule by selection Only
during and entering the times you want motion-triggered recording
to be enabled.
• Schedule: Enables recording according to a schedule. Enter the times
you want the camera to record. During these times, a snapshot will be
taken every second.
• Always: This will enable continuous recording. A snapshot will be
taken every second.
• Sound: Enables recording when sound is detected. You can limit
sound-triggered recording to a specific schedule by selection Only
during and entering the times you want sound-triggered recording
to be enabled.
Snapshot Type: Select whether to take a single snapshot or to take 6 snapshots with a
selectable interval between them. Snapshots will always use Video Profile
2. For more on video profile options, refer to Audio and Video on page 33.
Target: Select where you want the snapshot to be sent. It may be uploaded to
an FTP server or sent to an e-mail address. Enter the settings for your FTP
server or e-mail account.
Click Save Settings to save your changes.
D-Link DCS-2630L User Manual
Snapshot
37