Operation; Introduction; Operating Page - ABB AnalyzeIT AX460 User Manual

2 OPERATION

2.1 Introduction

The location of the PID controller programming pages and menus within the analyzer's operating software is shown in the overall
programming charts – see Figs. 2.1 and 2.2.
Use the Menu Key to
scroll through the Menus
Key to scroll through
Use the Sidescroll Key to scroll through the Pages within each Menu

OPERATING PAGE

SENSOR CAL.
Security Code
CONFIG. DISPLAY Refer to User Guide (IM/AX4PH)
CONFIG. SENSORS
CONFIG. ALARMS
CONFIG. OUTPUTS
Section 4.3, Page 12
CONFIG. CONTROL
Controller
Use the Downscroll
the Parameters
within each Page
Analog option board fitted
CONFIG. CLOCK
OR
Analog option board not fitted
CONFIG. SECURITY
Fig. 2.1 Overall Programming Chart – Single PID Controller
PID Controller Power Recovery
Control Action Power Rec. Mode
Proportional Band Default Output
Integral Time
Derivative Time
Output Type
Pulses/Minute
OR
Cycle Time
OR
Output Range
Refer to User Guide (IM/AX4PH)
5