Table of Contents
Advertisement
1
The Reset function is to reset the setting back to factory default
setting, once you press the "RESET" button within 10 seconds, the
LED of the WLAN will turn off. And when the Access Point is ready,
the WLAN LED will start blinking.
And the other function is when the AP is locked, press the reset
button to unlock it.
2
Before configurating thisWireless Multi-Function Access Point, you
need to know the following default settings.
Username: admin
Password : admin
IP Address : 192.168.1.1
Subnet Mask : 255.255.255.0
Wireless: SSSID= default, Channel=6, WEP=disable
58
Advertisement
Table of Contents
