Table of Contents
Related Manuals for Atlantis Land A02-AP-W54
Summary of Contents for Atlantis Land A02-AP-W54
-
Page 1: Access Point
Wireless Multi-Function Access Point A02-AP-W54 Quick Start Guide A02-AP-W54_GE01... - Page 2 Wireless Multi-Function Access Point ENGLISH This product is covered by Atlantis Land 3 years Fast-Swap warranty. For more detailed informations please refer to the web site www.atlantis-land.com. For more detailed instructions on configuring and using the Switch , please refer to the online manual.
- Page 3 Wireless Multi-Function Access Point Registration on the web site www.atlantis-land.com within 15 days from the purchase of the product dismiss the customer from showing a valid proof of purchase (Sale Receipt or Invoice) in case of the request of intervention. For further information we invite you to look at our web site at the section WARRANTY.
- Page 4 Wireless Multi-Function Access Point Congratulations on your purchase of this IEEE 802.11g Wireless Multi-Function Access Point. For more detailed instructions on configuring and using the Wireless Multi-Function Access Point, please refer to the online manual. 1.1 An Overview The device for a total freedom of movement without losing the connection.
-
Page 5: System Requirements
Wireless Multi-Function Access Point 1.2 System Requirements Before installing the Adapter, your PC should meet the following: Intel® Pentium®III 600Mhz or compatible processor with TCP/IP stack Iinternet Explorer V6.0 on Netscape V6.0 CDRom 1.3 Package Contents Unpack the package and check all the items carefully. If any item contained is damaged or missing, please contact your local dealer as soon as possible. - Page 6 Wireless Multi-Function Access Point The antenna’s position enhances the receiving sensitivity. Visually inspect if the Power Adapter was fully plugged to the device power jack (Connect the Power Adapter DC plug to the AP’s power jack DC-IN). 1.5 Location Locate an optimum location for the Wireless LAN Access Point (AP).
-
Page 7: Using Wireless Access Point
Wireless Multi-Function Access Point 1.6 Using Wireless Access Point 1.6.1 The Front LEDs The table below shows the LED Indicator of the Wireless Multi-Function Access Point. Meaning POWER This indicator lights green when the Access Point receives power. Otherwise, it turns off. - Page 8 Wireless Multi-Function Access Point Port Reverse Connectors Reset POWER (DC-IN) 1.7 TCP/IP The Wireless Multi-Function Access Point configured with your Web browser. The web browser is included as a standard application in the following operation systems, UNIX, 95/98/NT/2000/Me, and etc. The product provides a very easy and user-friendly interface for configuration.
-
Page 9: Default Settings
Wireless Multi-Function Access Point 1.7.1 IP Adress This section describes the configuration required by LAN- attached PCs that communicate with the Wireless Multi- Function Access Point, either to configure the device or for network access. These PCs must have an Ethernet interface (or wireless adapter) installed properly, be connected to the Wireless Multi-Function Access Point either directly or through an external repeater hub or by... -
Page 10: Accessing The Access Point Web Configurator
Wireless Multi-Function Access Point 1.9 Accessing the Access Point Web Configurator Before you configure this device, note that when the AP is configured through an Ethernet connection, make sure the manager PC must be set on same the IP network. Open Internet Explorer 5.0 or above Web browser. - Page 11 Wireless Multi-Function Access Point For more advance configuration, please refer to User’s Manual in the CD.
- Page 12 Atlantis Land S.p.A. Viale De Gasperi, 122 Mazzo di Rho – MI – Italy info@atlantis-land.com sales@atlantis-land.com...