Table of Contents
Advertisement
wireless network enable the WEP encryption. All the nodes and hosts on the
network must use the same authentication type.
WEP Key: To disable WEP security, click on the "Disable" option. To enable
WEP security, there are 2 types to select – 64bits and 128 bits. When it is
selected, the key value must be entered in ASCII or HEX format.
Note: When WEP security is enabled, all the wireless clients that wish to connect to
the Access Point must also have WEP enabled with the identical WEP Key value
entered.
WPA-PSK / WPA2-PSK: If WPA-PSK or WPA2-PSK is selected, user needs to
set the key in the passphrase field as the below screen. The key length should
be 8 characters at least.
Apply: For the changes made to any of the items above to be effective, click
"Apply". The new settings are now been saved to Access Point and will be
effective once the Access Point restarts.
Note: For entering to the Web Setting page after changing to AP Client mode, change
your PC/Notebook IP address to 192.168.1.x. After changing your IP address, type
192.168.1.1 on the Web browser to enter the setting of this Wireless AP.
32
Advertisement
Table of Contents
