Related Manuals for Atlantis Land NetFly WAP 108 A02-WAP-54G(V1.1)_GX01
Summary of Contents for Atlantis Land NetFly WAP 108 A02-WAP-54G(V1.1)_GX01
-
Page 1: Quick Start Guide
NetFly WAP 108 Wireless 108Mbps Multi-Function Access Point A02-WAP-54G MULTILANGUAGE QUICK START GUIDE A02-WAP-54G(V1.1)_GX01 Where solutions begin ISO 9001:2000 Certified Company... - Page 2 Italiano fare riferimento al sito www.atlantis-land.com. ENGLISH This product is covered by Atlantis Land 3 years Fast Swap warranty. For more detailed informations please refer to the web site www.atlantis-land.com. For more detailed instructions on configuring and using this device, please refer to the online manual.
- Page 3 WARRANTY. Copyright The Atlantis Land logo is a registered trademark of Atlantis Land SpA. All other names mentioned mat be trademarks or registered trademarks of their respective owners. Subject to change without notice. No liability for technical errors and/or omissions.
-
Page 4: Table Of Contents
MULTILANGUAGE QUICK START GUIDE ITALIANO 1.1 Contenuto della confezione ..............8 1.2 I LED frontali ..................8 1.3 Le porte posteriori .................. 9 1.4 Cablaggio ....................9 1.5 Settaggi di Default................10 1.6 Configurazione di IE................10 1.7 Configurazione del PC ................. 11 Configurazione del PC in Windows 95/98/ME........ -
Page 5: Multilanguage Quick Start Guide
MULTILANGUAGE QUICK START GUIDE 1.3 Face arrière..................35 1.4 Câblage....................35 1.5 Configuration initiale ................36 1.6 Configuration du TCP/IP ..............36 Configuration sous Windows 95/98/ME..........36 Configuration sous Windows NT4.0 ............37 Configuration sous Windows 2000 ............37 Configuration sous Windows XP ............37 Configuration sous Windows Vista ............ - Page 6 Atlantis Land spa. Tutti i nomi di produttori e dei prodotti e qualsiasi marchio, registrato o meno, menzionati in questo manuale sono usati al solo scopo identificativo e rimangono proprietà...
- Page 7 ITALIANO Dichiarazione di Conformità Questo dispositivo è stato testato ed è risultato conforme alla direttiva 1999/5/CE del parlamento Europeo e della Commissione Europea, a proposito di apparecchiature radio e periferiche per telecomunicazioni e loro mutuo riconoscimento. Dopo l’installazione, la periferica è stata trovata conforme ai seguenti standard: EN 300.328(radio), EN 301 489-1, EN 301 489-17(compatibilità...
-
Page 8: Contenuto Della Confezione
CDRom allegato. 1.1 Contenuto della confezione Atlantis Land Wireless 108Mbps Multi-Function Access Point , CD-Rom contenente il manuale, Guida di Quick Start, antenna esterna da 2 dBi, Alimentatore esterno (5V, 2.4A). -
Page 9: Le Porte Posteriori
ITALIANO 1.3 Le porte posteriori PORTE UTILIZZO Reverse SMA Collegare l’antenna fornita in dotazione. Dopo che il dispositivo è acceso, premere per effettuare il Reset reset per una decina di secondi, rilasciare e questo punto il bottone. Tutti i LED si accenderanno e poi il sistema effettuerà... -
Page 10: Settaggi Di Default
ITALIANO 1.5 Settaggi di Default Prima di iniziare la configurazione dell’Atlantis Wireless 108Mbps Access Point è necessario conoscere quali siano i settaggi di default. Lasciando questi settaggi e impostando i PC con IP fisso (come da istruzioni seguenti) è possibile utilizzare l’Atlantis Wireless 108Mbps Access Point in pochissimo tempo. -
Page 11: Configurazione Del Pc
ITALIANO 1.7 Configurazione del PC Configurazione del PC in Windows 95/98/ME Andare in Start/Settings/Control Panel. Cliccare 2 volte su Network e scegliere Configuration. Selezionare TCP/IP->NIC F/E, o qualsiasi Network Interface Card (NIC) del Cliccare su Properties. Selezionare l’opzione Specify an IP address (dopo aver scelto IP Address) ed introdurre un indirizzo IP del tipo 192.168.1.x (X compreso tra 2 e 254 escluso 1 che è... -
Page 12: Configurazione Del Pc In Windows Xp
ITALIANO Selezionare Internet Protocol (TCP/IP) e cliccare su Properties. Selezionare l’opzione Use the Following IP address ed introdurre un indirizzo IP del tipo 192.168.1.x (X compreso tra 2 e 254 escluso 1 che è l’IP utilizzato del Wireless Multi-Function AP) e subnet mask 255.255.255.0. Successivamente scegliere Use the Following DNS server address (chiedere tale informazione al proprio ISP) ed introdurre l’indirizo IP dei server DNS. -
Page 13: Configurazione Dell'access Point
ITALIANO Selezionare l’opzione Utilizza il seguente indirizzo P ed introdurre un indirizzo IP del tipo 192.168.1.x (X compreso tra 2 e 254 escluso 1 che è l’IP utilizzato del Wireless Multi-Function AP) e subnet mask 255.255.255.0. Successivamente Utilizza i seguenti indirizzi server DNS (chiedere tale informazione al proprio ISP) ed introdurre l’indirizzo IP dei server DNS. -
Page 14: Quick Wizard Setup
ITALIANO Quick Wizard Setup Grazie a questo Wizard è possibile configurare il dispositivo in brevissimo tempo. Apparirà l’immagine di sotto (qualora non fosse così, cliccare sul bottone Wizard). Cliccare su Next per proseguire. A02-WAP-54G... - Page 15 ITALIANO Step 1: Modifica Password E’ possibile adesso cambiare la password di accesso, cliccare poi su Next per passare al prossimo step. A02-WAP-54G...
- Page 16 ITALIANO Step 2: Set Wireless LAN connection Introdurre il valore di SSID (deve essere identico in tutti i dispositivi) e scegliere il canale su cui opererà il dispositivo. A02-WAP-54G...
- Page 17 ITALIANO Step 3: Set WEP Encryption Per abilitare la cifratura WEP spuntare enable, scegliere la lunghezza della chiave WEP tra 64 e 128 bit ed immettere la chiave nel campo Key. Cliccare su Next per proseguire. Step 4: Restart Cliccare, nella schermata seguente, su Restart (e poi su Close) per rendere permanenti i nuovi settaggi.
-
Page 18: Supporto Offerto
Per qualunque altro problema o dubbio (prima è opportuno munirsi del seriale e codice prodotto) è possibile contattare l’help desk telefonico (02/93907634) gratuito di Atlantis Land che fornirà assistenza da lunedì al giovedì dalle 9:00 alle 13:00 e dalle 14:00 alle 18:00 ed il venerdì dalle 9:00 alle 13:00. E’ possibile anche utilizzare il fax (02/93906161) la posta elettronica (tecnici@atlantis-land.com) per... -
Page 19: English
Windows™ 98SE/2000/ME/XP are trademarks of Microsoft® Corp. Pentium is trademark of Intel. All copyright reserved. The Atlantis Land logo is a registered trademark of Atlantis Land SpA. All other names mentioned mat be trademarks or registered trademarks of their respective owners. -
Page 20: English
ENGLISH Germany, UK, Italy, Spain, Belgium, Netherlands, Portugal, Greece, Ireland, Denmark, Luxembourg, Austria, Finland, Sweden, Norway and Iceland. France: except the channel 10 through 13, law prohibits the use of other channels. CE/EMC Restriction of Liability The product described in this handbook was designed, produced and approved according to the EMC-regulations and is certified to be within EMC limitations. -
Page 21: Package Contents
For more detailed instructions on configuring and using the Wireless Access Point, please refer to the online manual. 1.1 Package contents Atlantis Land Wireless 108Mbps Multi-Function Access Point, CD-Rom with manual, Quick Start Guide, External 2 dBi Antenna, Power Adapter AC-DC (5V, 2.4A). 1.2 The Front Panel LEDs... -
Page 22: The Rear Ports
ENGLISH 1.3 The Rear Ports PORT MEANING There is one 2dBi Gain Antenna in the rear panel for Reverse SMA wireless connection. After the device has turned on, press it to reset the Reset device or restore to factory default settings. Use a pin- shape item to push to reset this device to factory default settings. -
Page 23: Default Settings
ENGLISH The LEDs of the Access Point are clearly visible and the status of the network link can be seen instantly: With the power source on, once the device is connected, the Power, LAN and WLAN port LEDs will light up indicating a normal status. If the LAN Port’s Link indicator does not light up then check the RJ-45 cable if it is firmly feed to the RJ45 port, while the LAN is link up to the Switch/Hub, the LAN port’s LED will light up. -
Page 24: Ie Configuration
ENGLISH Please follow the steps below for PC’s network environment installation. First of all, please check your PC’s network components. The TCP/IP protocol stack and Ethernet network adapter must be installed. If not, please refer to MS Windows relative manuals. Before you configure this Wireless 108Mbps Access Point, you need to know the following default settings: •... -
Page 25: Configuring Pc (Windows Nt4.0)
ENGLISH Configuring PC (Windows NT4.0) Go to Start / Settings / Control Panel. In the Control Panel, double-click on Network and choose the Protocols tab. Select TCP/IP Protocol and click Properties. Select the Obtain an IP address from a DHCP server radio button and click OK. -
Page 26: Configuring Pc (Windows Vista)
ENGLISH Configuring PC (Windows Vista) Go to Start / Control Panel (in Classic View). In the Control Panel, double- click on Network and Sharing Center. Click Manage network connections then double click on Local Area Connection. Click Continue (Windows needs your permission to continue). Select Internet Protocol Version 4(TCP/IPv4) and click Properties Select the Use the following IP address radio buttons (EG IP=192.168.1.2 and subnet Mask=255.255.255.0). -
Page 27: Quick Wizard Setup
ENGLISH Quick Wizard Setup The following screen will appear. Please click Next to continue. You also can go back to modify the setting by clicking Back (when available). A02-WAP-54G... - Page 28 ENGLISH Step 1: Set Password You can change the password as you like and then click Next to continue. A02-WAP-54G...
- Page 29 ENGLISH Step 2: Set Wireless LAN connection Click enable to enable wireless LAN. If you enable the wireless LAN, type the SSID in the text box and select a communications channel. The SSID and channel must be the same as wireless devices attempting communication to theAccess Point. Select a channel number and click on Next.
- Page 30 ENGLISH Step 3: Set WEP Encryption If user wants to enable WEP, please click Enabled. Then, select the key size of WEP encryption and enter the key value in the key text box. Please click Next to continue. A02-WAP-54G...
-
Page 31: Product Support
CDRom. If you continue to have problems you should contact the dealer where you bought this device. If you have any other questions you can contact the Atlantis Land company directly at the following address: Atlantis Land SpA Viale De Gasperi, 122 20017 Mazzo di Rho(MI) Tel: +39. - Page 32 FRANCAIS Copyright Copyright. 2002 est la propriété de cette société. Tout droits réservés. Sont interdites, la reproduction, la transmission, la transcription, la mémorisation dans un système de sauvegarde où la traduction dans une autre langue ou en langage informatique quels qu’ils soient, de la présente publication, sous quelque forme que ce soit ou quelque en soit le moyen, électronique, mécanique, magnétique, optique, chimique, manuel ou de tout autre genre, sans avoir obtenu préalablement l’autorisation de notre entreprise.
- Page 33 FRANCAIS Déclaration de Conformité Cet appareil a été testé et est conforme à la Directive 1999/5/CE du Parlement européen et du Conseil concernant les équipements hertziens et les équipements de terminaux de télécommunications et la reconnaissance mutuelle de leur conformité. Après évaluation du matériel, celui-ci est conforme aux normes suivantes : EN 300.328 (radio), EN 301 489-1, EN 301 489-17(compatibilité...
-
Page 34: Contenu De La Boîte
FRANCAIS Ce guide d’installation rapide vous permet d’installer et de configurer le Wireless 108Mbps Access Pointsuivant des paramètres standards. Pour plus de précisions, tant sur les méthodes de configuration que sur le paramétrage avancé, reportez-vous au Manuel sous format électronique (PDF) disponible sur le CD Rom fourni. -
Page 35: Face Arrière
FRANCAIS 1.3 Face arrière PORT USAGE Reverse SMA Il faut connecter l’antenne dans la boite. Dispositif allumé, presser pour effectuer le reset ou le Reset restore. Pressez le reset pour 10s pour effectuer une remise à zéro du dispositif. (remise à zéro) Relier directement avec un câble Ethernet standard ou croisé... -
Page 36: Configuration Initiale
FRANCAIS 1.5 Configuration initiale Avant de commencer la configuration du Wireless 108Mbps Access Point il est nécessaire de connaître la configuration initiale (paramètres par défaut). Pour pouvoir utiliser le Wireless 108Mbps Access Point en peu de temps, il suffit de garder la configuration par défaut, de mettre les PCavec une IP fixe. Pour une configuration plus détaillée faire référence au manuel complet sur le CD-Rom. -
Page 37: Configuration Sous Windows Nt4.0
FRANCAIS Cliquez sur Propriétés Dans l’onglet Adresse IP Sélectionnez l’option Specify an IP address et introduisez 192.168.1.2 (IP) et subnet 255.255.255.0 (Subnet Mask). Sélectionnez l’onglet DNS. Sélectionnez l’option Activer DNS et cliquez sur OK pour terminer la configuration. Vous devez redémarrer l’ordinateur pour que les changements prennent effet. -
Page 38: Configuration Sous Windows Vista
FRANCAIS Cliquez Propriétés. Sélectionnez Internet Protocol (TCP/IP) et cliquez sur Properties. Sélectionnez Utiliser l’adresse IP suivante (192.168.1.2) et et 255.255.255.0 (masque de sous réseau). Cliquez sur OK pour terminer la configuration. Configuration sous Windows Vista Allez sur Panneau de Configuration (Affichage Classique). Double- cliquez sur Accès Réseau. -
Page 39: Configuration Avec Le Browser
FRANCAIS Pinging 192.168.1.1 with 32 bytes of date: Request timed out. Request timed out. Request timed out. Vérifiez que le Led LAN est bien allumé. Vérifiez l'adresse de votre PC en écrivant WINIPCFG (pour, Win95,98,ME) ou IPCONFIG (pour Win2000, XP) et éventuellement réinstallez le stack TCP/IP. 1.8 Configuration avec le Browser Pour accéder à... -
Page 40: Quick Wizard Setup
FRANCAIS Quick Wizard Setup Grâce à cet Wizard vous pourrez configurer le dispositif en très peu de temp. Vous devrez voir l’image en bas (dans le cas que n’est pas comme ça, cliquez sur le bouton Wizard). Cliquez sur Next pour continuer. A02-WAP-54G... - Page 41 FRANCAIS Step 1: Modification du mot de passe Vous pouvez maintenant changer le mot de passe, cliquez puis sur Next pour passer au prochaine pas. A02-WAP-54G...
- Page 42 FRANCAIS Step 2: Set Wireless LAN connection Introduisez la valeur de SSID (il doit être identique en tous les dispositifs). Si vous habilitez le wireless LAN, introduisez le SSID dans le champ du texte et sélectionnez le canal de communication. Le canal SSID doit être le même que celui des apparats wireless qui essayent la communication avec le produit.
- Page 43 FRANCAIS Step 3: Set WEP Encryption Dans cette section, vous pourrez configurer le type d’authentification entre les appareils afin d’obtenir une communication sans fil sécurisée. Sélectionnez enable et après le nombre de bits utilisé pour la clé (64 ou 128 la plus sécurisante) Introduisez manuellement la clé...
-
Page 44: Support
1.9 Support Pour tous problèmes ou renseignements, vous pouvez contacter la « help desk » téléphonique gratuite d’Atlantis Land qui vous fournira assistance du: lundi au jeudi de 9.00 à 13.00 et 14.00 à 18.00. Le vendredi de 9.00 à 13.00. - Page 45 NOTE A02-WAP-54G...
-
Page 46: Appendix A: Regulatory Domains
NOTE APPENDIX A: Regulatory Domains For some European Country, it may have its own domain; users are responsible for ensuring that the channel set configuration is in compliance with the regulatory standards of these countries. Country Code Channel Regulatory Domains Region 1-11 USA/CANADA... -
Page 47: Appendix B: Technical Features
NOTE APPENDIX B: Technical Features Physical Interface LAN: 1 x RJ45 10/100 Base-T Ethernet auto-crossover (MDI/MDI-X) 3 diagnostic LEDs Reset Button Hardware: Wireless Chipset: Atheros® 2316 Radio Spec. Standard IEEE802.11g and IEEE802.11b DSSS(Direct Sequence Spread Spectrum) Modulation: QPSK / BPSK / CCK and OFDM RF Frequency: 2.400 GHz ~2.4835 GHz Operating Channel: 13 (Europe) Data Rate (with automatic adaptation): 802.11g: Up to 54Mbps (with Automatic Fall-Back) and... - Page 48 NOTE Access Point Client Wireless Wireless Bridge and Multiple Bridge Repeat Mode Configuration & Management Web-based configuration utility TFTP for software upgrade available and Status log Physical and Environmental Power Consumation: (AC Adapter, 5V ± 5%, 2.4A) Dimensions/Weight:145mm*110mm*35mm / 350g Temperature/ Operating:[0°C to 40°C], Storage:[-20°C to 65°C] Humidity:5-95% (without condensing) Package contents...
- Page 49 Atlantis Land S.p.A. Viale De Gasperi, 122 Mazzo di Rho – MI – Italy info@atlantis-land.com sales@atlantis-land.com Where solutions begin ISO 9001:2000 Certified Company...