Table of Contents
Advertisement
WEP Key: To disable WEP security, click on the "Disable" option. To enable
WEP security, there are 2 types to select – 64bits and 128 bits. When it is
selected, the key value must be entered in ASCII or HEX format.
Note: When the WEP security is enabled, all the wireless clients that wish to connect
to the Access Point must also have WEP enabled with the identical WEP Key value
entered.
WEP is not completely secure. If possible please use WPA-PSK.
WPA-PSK / WPA2-PSK: If WPA-PSK or WPA2-PSK is selected, user needs to
set the key in the passphrase field as the below screen. The key length should
be 8 characters at least.
WPA / WPA2: If WPA or WPA2 is selected, the below screen is shown. Please
set the length of the encryption key and the parameters for the RADIUS server.
1.
2.
Apply: For the changes made to any of the items above to be effective, click
"Apply". The new settings are now been saved to Access Point and will be
effective once the Access Point restarts.
RADIUS Server 1: Enter the IP address of and the Port used
by the Primary Radius Server, enter the Shared Secret, which is
used by the Radius Server.
RADIUS Server 2(optional): Enter the IP address of and the
Port used by the Secondary Radius Server, enter the Shared
Secret, which is used by the Radius Server.
29
Advertisement
Table of Contents
