Step 4: Configure Wireless Network - D-Link DSL-2790U User Manual

Section 3 - Getting Started
This step of the wizard allows you to configure your Wireless network settings.
By default, wireless is enabled. If you want to disable the DSL-2790U's wireless
capability, uncheck Enable Your Wireless Network.
Under Wireless Network Name (SSID) you can change the SSID of your
wireless network, for easier identification by wireless clients. If Visibility
Status is set to Visible, this name will show up when a client in range scans
for wireless networks. Otherwise, if your network is Invisible, clients will have
to enter the SSID in order to connect.
Choose the best security level that is compatible with your wireless
clients. WPA2-PSK is recommended. Unless you chose None (this is NOT
recommended), you will need to enter a key below. Wireless clients requesting
a connection with the network will need to enter this key in order to connect.
Click Next to continue.
D-Link DSL-2790U Wireless N300 ADSL2+ Modem Router User Manual

Step 4: Configure Wireless Network

20