Section 4 - Configuration
The screen allows you to create a filter rule to identify incoming IP traffic by specifying a
new filter name and at least one condition below. All of the specified conditions in this filter
rule must be satisfied for the rule to take effect.
By default, all incoming IP traffic from WAN is blocked when the firewall is enabled, but some
IP traffic can be ACCEPTED by setting up filters.
ACTIVE INBOUND IP FILTERING.
The current active inbound IP filters will be listed here.
Click Add to add a new rule to the inbound filter list.
Enter the incoming IP filter rules.
Click Apply when you are done.
D-Link DSL-2790U Wireless N300 ADSL2+ Modem Router User Manual
Incoming IP Filtering
INCOMING IP FILTERING.
61