Recording Pictures On A Card To A Tape - Panasonic NV-EX21EG Operating Instructions Manual

3, ,
RESET
CAMERA
VCR
CARD P. B
ACCESS
1
38

Recording Pictures on a Card to a Tape

W.B./SHUTTER/IRIS/
Card Images can be recorded on the Tape one at a time or all automatically.
MF/VOL/JOG
After setting to Card Playback Mode, please carry out the following steps.
2 1
To Copy 1 Picture
PUSH
1
2
3,
3
4
4
PHOTO
SHOT
≥In the case of recording to tape, select the tape position before recording.
TAPE
The memory image will be recorded to the tape position where the
1
CARD
[PHOTOSHOT] Button is pressed at step 4.
To Copy All the Pictures
1 1 1 1
2 2 2 2
3 3 3 3
2,
PICTURE MPEG4 VOICE
CARD
MODE
MODE
OFF ON
≥Moving Picture data and Voice data cannot be recorded from a card to tape.
≥When pictures with a size other than [640k480] are copied onto the
cassette, their picture quality will deteriorate somewhat.
≥The size of the Picture recorded on a Card to a Tape is [640k480].
≥During recording from Card to Tape an index signal is automatically
recorded.
≥Regardless of the setting of [PRESET] in [SLIDE SHOW], data is recorded
onto the tape from the currently playing back picture to the last picture.
Slide the [TAPE/CARD] Selector towards [TAPE].
Slide the [PICTURE/MPEG4/VOICE] Switch to [PICTURE].
Display a desired picture.
Press the [PHOTO SHOT] Button.
≥During the copying, the Indication
≥It takes approximately
a few
Slide the [PICTURE/MPEG4/VOICE] Switch to [PICTURE].
Display the first picture.
≥If a picture other than the first one is displayed, only the subsequent
pictures will be copied.
Set [CARD FUNCTIONS] >> [CARD EDITING] >>
[RECORD TO TAPE] >> [YES].
≥During the copying, the Indication
≥It takes approximately
a few
the Tape. To stop the copying midway, press the [∫] Button.
1
appears.
seconds to record a picture to the Tape.
1
appears.
seconds for each picture to be copied on