Playing Back A Card - Panasonic NV-EX21EG Operating Instructions Manual

W.B./SHUTTER/IRIS/
, 1 , 2
,
MF/VOL/JOG
2
PUSH
1
2,
PICTURE MPEG4 VOICE
RESET
CARD
MODE
OFF ON MODE
CAMERA
VCR
CARD P. B
1
TAPE
ACCESS
CARD
PICTURE
1
IMGA0012.JPG
MPEG4
1
MOL012.ASF
0h00m49s
VOICE
5
PICTURE
640 1200 640
640 640 1200
No.25 IMGA0012.JPG
3 1
6
No.3

Playing Back a Card

It plays back files recorded on a Card.
1
Set the Movie Camera to Card Playback Mode.
1
≥The [CARD P.B] Lamp lights up.
≥The file that was recorded last on the Card is displayed.
2
Slide the [PICTURE/MPEG4/VOICE] Selector Switch to select
the type of data.
3,
3
Start Playback.
1
:
:
5
,
:
6
:
∫
; :
When [PICTURE] is selected at
≥When [SLIDE SHOW] is set to [ALL], pressing [
play back continuously.
≥When [SLIDE SHOW] is set to [PRESET], pressing [
(l 39) start.
When [VOICE] is selected at
≥If you keep pressing the [5] Button or the [6] Button for 1 or more
seconds, it becomes 10 t playback, and keep pressing for
seconds it becomes 60 t playback.
≥When [MPEG4] or [VOICE] is selected at step 2, during playing, keep
pressing the [PUSH] Dial until the [VOLUME] Indication appears and turn it
2
to adjust the sound volume.
3
1
File Name
2
Picture Size (When [PICTURE] is selected at step 2.)
3
File Number
4
Playback Time (When [MPEG4] or [VOICE] is selected at step 2.)
4
3
To Select a Desired File and Play It Back
1 1 1 1
Slide the [PICTURE/MPEG4/VOICE] Selector Switch to select
the type of data.
2 2 2 2
Press the [MULTI] Button.
≥The files recorded on the Card are displayed in Multi-Picture Mode.
4
3 3 3 3
Turn the [PUSH] Dial and select a desired file.
3
≥The selected file is marked with a frame.
≥When 7 or more files have been recorded, turn the [PUSH] Dial to
display the next file. (The [6] Button or [5] Button can be used
instead of the [PUSH] Dial.)
4 4 4 4
2
Press either the [PUSH] Dial or the [MULTI] Button.
≥The selected file is shown on the entire screen.
(Playback the Picture Only)
5 5 5 5
Press the [1] Button.
Using File Search Mode
1
Set [CARD FUNCTIONS] >> [CARD EDITING] >>
[FILE SEARCH]
≥The File search screen
2
Turn the [PUSH] Dial and select the desired file number, and
press the [PUSH] Dial.
≥For other notes concerning this item, see page 50.
Playing back the File
Playing back the next File
Playing back the previous File
Stop the playing back
Pause playing back (When playing back MPEG4 Data or
Voice Data, this button doesn't pause playing back within 2
seconds of finishing playing back.)
step2
step2
>> [YES].
6
appears.
1
] makes all the pictures
1
] makes Slide Show
7 or more
5
37